Product explanation:
These machines are manufactured and designed to meet the requirements of relevant standards, such as GB/T2423.17, JIS Z 2371, ASTM B-117 and more. It is used for test the ability of material to resist erodent by brine, those materials may be used in Electrical Appliances, Electrical wire accessories, luminaires etc.

Features:
* All accessories are comes from German, Japan and Taiwan. Excellent accessories makes excellent testers.
* All PP and PVC construction, it can working in an acidic and alkaline environment never been aged.
* It can perform both Brine and Cupric Acetate test.
* Patent atomizing nozzle and coniform diffuse device makes fog more symmetrical.
* Provides spray capacity measuring barrel.
* Test period can be preset from 0.01s to 9999h freely.
* It can water into test chamber and saturation tower automatically or manually.
* Double over-heated protection system protect the security of both machine and operator.
* Temperature controller from OMRON(Japan) makes temperature precision reach ± 0.1 Celsius degrees.
* It will demist the chamber automatically to make your view more convenient when test over.
* Temperature in test chamber can be rised quickly by an excellent titanium alloy heater from Taiwan.
* Cover was made by acrylic with thickness at 5mm from German.
* Provides lucite rods to hang or support specimens within the test chamber.

Technical parameter:
Internal dimensions(W*D*H cm): 90*60*50
External dimensions(W*D*H cm): 143*78*128
Test chamber capacity: 270L
Salt solution reservoir: 25L
Salt spray nozzle: 1 PCS
Operating hours: 72 h
Removable slotted sample rods: 8 rods, 6 shelves
Cover lift: N/A
Saturation tower capacity: 4L
Chamber construction: Polypropylene or PVC
Color: Gray
Temperature range(PVC construction): Up to +60 degree C(Test chamber), Up to +70 degree C(Saturation tower)
Temperature range(PP construction): Up to +70 degree C(Test chamber), Up to +80 degree C(Saturation tower)
Salt spray fall-out rates: Adjustable from 1.0 to 2.0 ml per 80 cm2 per hour
Spray pressure: 0.8~2.0kgf/cm2(powered by compressed air)
Power supply: 1 phase, voltage and frequency dependant on country/region of installation
Exhaust: Exhaust pipe should be terminated outside building
Drain: Drain pipe should be terminated into floor level drain