Qingdao Tianrun high-frequency induction heating equipment, mechanical high-frequency, intermediate frequency equipment, equipment hardening, annealing equipment, high-frequency welding equipment, easy to use, means that the use!

The basic principle of induction heating the workpiece on the sensor, when the sensor through the alternating current in the inductor current is created around the same frequency with the alternating magnetic field, corresponding to the workpiece induced electromotive force generated in the surface the formation of induced currents, that vortex. This eddy current resistance of the workpiece under the action of electrical energy into heat, the surface temperature of the quenching temperature, surface hardening can be achieved.

Frequency, high frequency, ultra-high frequency induction heating equipment, the advantages compared to traditional heating equipment are:

1, ultra-small size; 2, 24 hours of uninterrupted work; 3, energy saving, low production cost; 4, the installation, operation is very convenient, that school that will; 5, heating speed, to reduce surface oxidation; 6 to avoid surface decarburization, improve product quality; 7, greatly improve the workshop environment.

Part of the tube model are as follows (not an exhaustive list, waiting for further information):
FU-7 (807) FU-811J FU-81J FU-33J (833A) FU-501J FU-605 (FU-3051F, 6T51) FU-606F (6T58RA) FU-3062F (E3062C, 7T62R) FU-724F FU-8801F (7T84RB) FU-915F / S 7T85RB (FU-8802F, FU-947F) 7T69RB (FU-8702F, FU-946F) FU-824F 8T85RB (FU-8703F) ITL5-1 FU-834FA 8T25RB (FU-8025F) ITL12-1 3CX10000D3 FU-10S FU-921S FU-22S FU-307S FU-924F FU-308S 3CX15000H3 FU-431S FU-433S FD-911S FD-934S FD-912S FD-935S