Detailed Product Description
XWG LQSI LQSW XQB XP H N S type None-sbupressure Frequent conversion water feeding equipment
Saving energy and saving money
Easy assembly
Wide application
Multi-function
Dependable quality
Wide adaptability
Advanced product
High intelligence
Product introduction:
Traditional water supplying type depend on the water in the pool and transmitted to everywhere through pipe net, however, it cause the tremendous energy waste since let the pressurized water into pool to become calm down.
XWG series developed by our technicians on the basis of Air-pressure equipment, that can connected with the water pipe net directly and cause no adverse influence to it, which could be in palace of the water pool and water box on the roof, take the full advantage of the pressure from the pipe net to supply water directly or indirectly, avoiding the secondary water contamination and waste, saving much investment for the capital construction and shortening the construction period.
XWG series consists of frequent converse control box, stability tank, pump group, water meter, valve and pipe, supporters etc, applies in water system of improving water pressure and stabilizing flow rate.
Characteristics:
1Free from construction of pool, saving energy, money: , XWG is a economical equipment, saving your much money, it could save your 50% more fee of building a new pool, and 20% to 40% compare with other water feeding equipment.
2Simple assembly, saving space: XWG could be vertical viscous liquid flow tank as well as that of horizontal one. Two types has different traits: Vertical tank need smaller square, and horizontal tank need smaller space, all these two types are confirm to the requirement of Stainless Steel Pressure Container, inner paint of tank can suitable for the food filed.
3Wide application, XWG water feeding equipment could feed water to civil engineering and fire control, fitted with any type of pump.
4Total solution, high intelligence: XWG introduced advanced frequent conversion control technology, which including: Soft-startup, protection from the equipment from over-load, short circuit, over-pressure, over- heat etc, and auto alarm in unusually condition through signal and self inspection, auto adjust the feeding water rate acc to the usuage.
5Dependable quality, we are committed to produce the quality products that is proved by our clients and many factories, the key components in the products introduced the well-known brand in China and world, such as electric motor, shaft, relay etc.
Assembly and regualation:
1Basic dimension shall be acc to the MFG drawing; The position and specification shall conform to engineering requirement and TJ231 corresponding requirements.
2Make sure the equipment levelness should be in the range of 0.1%.
3Pipe assembly shall be executed 24 hours later after secondary grouting, when position levelness is /confirm/ied.
4Electric motor switch direction shall conform to the indicator.
Handling and operation
1. Move the shaft of the equipment, it should be smooth, no block and friction.
2. Check the isolation of the electric motor, which value shall exceed 0.5m.
3. No broken of control meter and circuit line.
4. Open inlet valve, close outlet valve, then open the air relief valve one by one, last close the air valve when liquid saturated in the chamber.
5. Put the switch position to manual, initiate the pump without any load, the working direction shall conform to that of indicator.
6. Open and Close each pump, check if there is any abnormal performance.
