The name of cutting equipment Name: ZLQ-4-NC-Lung pump with multi-cutting machine (6.8 million) the (yuan)

ZLQ-4-NC-cutting machine for the gantry structure, (which can be configured at the same time the flame and plasma cutting) a horizontal span of 3m, 4m, 5m, 6m, and so on a variety of specifications, according to the vertical 3m an unlimited extension of the use of bilateral Drive. May require the user to configure more than the cutting torch can be configured into a special dual-use article Pumped cutting and cutting. Another alternative distribution automatically increase the risk of over-simplification plasma system. Features: Simple operation, CAD cutting direct conversion; Stable performance can be different in the harsh conditions of use for a long time; To provide life NC system software upgrade services, users will always provide the latest cutting ideas. Using horizontal linear guide rail, Si Fu FA BU for the electric motors, planetary reducer for the reducer.

Technical parameters:
1. Cutting speed: 0 ~ 3500mmmin
2. Thickness of cutting: Plasma cutting 1 ~ 60mm (by the user equipped with plasma power may be) flame cutting 3 ~ 350mm
3. Mobile accuracy: 0.01mm step
4. The work of power: ~ 220V, 50Hz, 500-1000W
5. Automatically increase the travel: 150-230mm

The main equipment parameters are as follows:
Cutting torch travel: 200mm
Mobile accuracy: 0.00mm / step
Maximum cutting speed: 3500mm/min
Automatic take-off and landing accuracy: 0.5mm

Integrated precision machine:
A. Side errors (four) 0.3mm
B. 0.5mm diagonal bias
C. Back to square deviation of 0.2mm
D. Diagonal straightness 0.3mm
E. 0.5mm focal point deviation
F. Good or bad times in a straight line 0.2mm deviation
G. 0.3mm positioning accuracy of machine

Flame cutting:
A. Verticality tolerance and tolerance inclination (u): U (mm) = 0.4 +0.015 a
B. Tolerance surface roughness (Rz): Rz (um) = 70 +1.2 a