Width of engraving  : 630mm
Biggest width of paper: 720mm
Cutting speed: 60-720mm/s
Cutting force: 50-500g
Buffer capacity: 1M
LCD: yes
CPU: 8-bit CPU
DRIVE: Stepping
Maximum media thickness: 0.25mm[10 mils]
Maximum cutting speed: 40cm/s [17 ips] in all directions
Blade type: Super steel [1.2mm and 2.0mm]
Display panel: 8digits x 2 line LCD
Interfaces: parallel & serial, USB
Power requirements  : AC110V+-10% or AC220V+-10%
Commands Set: DMPL/HPGL