Diamond Granite Arix Saw Blade

Features:
1. For cutting granite and engineered stone etc.
2. Patterned Blade with the best technology in the cutting field
3. Silent or Non-silent core also are available

Description:
(1). Fast cutting --- Piranha MLA blade cut 3cm thickness hard granite slab, the speed is even 210% faster than normal blade.
(2). Low noise --- Piranha MLA silent blade has 0.5~2.5 dB lower than traditional blades.
(3). No Chipping --- Piranha MLA blade will not cause chipping at all because diamonds always on both sides of segment is fine enough to provide fast and chip-free cutting.
(4). Straight cutting --- A groove appears on the segment during cutting because of evenly distributed diamonds to keep straight cutting.
(5). Consistency --- Piranha MLA blade guarantee consistent performance throughout the cutting process.

Arix granite silent or non-silent blade's advantage is as followed
A)cutting speed is 15%faster than normal granite blade(no-arix)
B)the cutting life is 10%more than normal granite blade(no-arix)
C)it can cut various hardness materials widely
Our arix saw blade: Below D600mm, every segment has 8 layer diamond arrayed, Above D600mm, every segment has 10 layer diamond arrayed

Three types of arix granite cutting blade
9001B Normal arix granite cutting blade: The cutting speed is 5m/min cutting 30mm granite slab

9001C Concept arix granite cutting blade: The cutting speed is 5.5m/min cutting 30mm granite slab

9001A Piranha arix granite cutting blade: The cutting speed is 6.3m/min cutting 30mm granite slab