I. Wastewater UV disinfection Component:
1. Waste water disinfection (water capacity over 5000 T/D)
2. Open channel/ UV channel box
3. 2-4 lamps in a module (low pressure/ high output)
4. High transmittance quartz sleeve
5. Stainless steel reaction chamber: SS 304 or SS 316L available
6. Manual switch (on/off)
7. Manual/ Auto cleaning system

II. Wastewater UV disinfection Specifications
Electrical Supply: 120V/60/Hz or 220V/50Hz
Maximum Operating Pressure: 125PSI to 10 bar
Operating Temperature: 2~40 centigrade
1. Waste water disinfection (water capacity more than 5000 T/D)
2. Open channel
3. 2-4 lamps in a module (low pressure/ high output)
4. High transmittance quartz sleeve
5. Stainless steel reaction chamber: SUS 304 or SUS 316 available
6. Manual switch (on/off)
7. Manual/ Auto cleaning system

III. Wastewater UV disinfection Parameters
1. Specific water quality: Used for disinfecting municipal water, industrial water, waste water, tap water, well water or somewhere else
2. SS in the treated water, BOD or COD index if possible.
3. The application of the water
4. The pretreatment procedure before using UV sterilizer

IV. Factors influencing Wastewater UV disinfection effectiveness
1. The type of lamp in the application
2. The length of lamp being used
3. The physical design of the UV's water exposure chamber
4. The condition of the water being treated especially SS index

V. Wastewater UV disinfection Application
Mainly used for wastewater disinfection
Municipal water, hospital, industrial sewerage
Median water recycling