Features:
1. The dual wave solder pot made of anti-erosion titanium alloy. Both of the vibrational and the horizontal wave are adopting world top technology. External heating style, heating board is made of cast copper that they make conductive caloric fast and well-proporitioned. The wave soldering machine is available with a beautiful appearance of a stream line convenient to clean.
2. Automatic and synchro PCB input smooth and steady. (Option: SMEMA Communication Interface)
3. Adopting the latest hi-tech resin nozzle pressing fingers and resin double-hook fingers, never adhering tin or adsorbing heat, no distortion; Titanium alloy fingers saving 80% energy. Electronic frequency variation infinite speed variation, operating viscosity V= 0.3~1.8m/min.
4. Step motor drive nozzle to spray, Japanese FUSO nozzle. The spray area and time will automatic adjustment that follows the width of PCB and change of speed. Three sides exhaust and filter system which is protecting environment.
5. Unique rosin filter system: Prevents the exhaust motor from damage, due to rosin coagulation.
6. Hot air preheating system: 1.6m/1.8m flat hot air preheating system that heating equality and will not have heat concussion, and the bigest strong point is save power.
7. Short distance dual wave solder pot can greatly improve the soldering quality which maybe influenced by low wetness of lead-free solder. The temperature difference is less than 30 between first wave and second wave. The solder point intensity phenomenon that maybe caused by soldering coated surface can be prevented efficiency. The antierosion titanium alloy solder pot makes lowest solder oxidation. It can lead the solder residues float to one place automatically and is convenient clean.
8. Ultra-low quantity of oxidation design, nozzle selectable according to the products of the clients, mostly humanized; Intelligent adjustment of wave soldering angles, sufficiently embodying the humanization.
9. Automatic finger cleaning equipment: import quality mini chemical pump with alcohol detergent that can clean the chain and finger automatically.
10. Fan cooling system: Room temperature (Turbine increasing the pressure) quick cooling system
11. Economical operation: The solder wave raise and down automatically follow PCB motion; The quantity of daily oxygenation can by 30% at least.

Technology Parameters
Conveyor motor3¢ 380V 90W
Conveyor speed0.5-1.8m/min
PCB size50-350mm(w)
Air pressure of spray fluxer3-5 Bar
Fluxer capacityApprox. 16 Liters
Serve control systemMax: 380mm
Pre-heater 1.8/2.0m22.5kw
Pre-heater fan220V 90W x 6
Solder pot heater220V 1500W × 9pcs
Solder capacityAPPROX. 500kg
Wave motor3¢ 380V 180W
Solder temperatureMAX 300º C
Cooling fan220V 550W
Finger cleaning pump220V 10W
Conveyor angleAdjustable4-6°
Total power consumptionApprox. 40kw
Power supply3¢ 380V 50Hz
Control systemPCPLC
Dimension3800(L) × 1400(W) × 1500(H)mm
Net weightApprox. 1500kg