The process of this automatic production line for plastic crushing and washing:
1) Plastic raw materials conveying
2) Crushing
3) Feeding
4) Floatation
5) Agitating washing
6) Feeding
7) Scrubbing-washing
8) Feeding
9) Rinsing
10) Drying
11) Containing

Major components of this line:
1) Conveyer
2) Crusher
3) Feeding-screw
4) Floatation machine
5) Feeding-screw
6) Agitating washing machine
7) Feeding-screw
8) Scrubbing-washing machine
9) Rinsing-washing machine
10) Dryer
11) Container system
12) Electric control cabinet system

Specifications of the components above:
1) Conveyer:
A) Delivering capacity: 350kg/h
B) Motor power: 0.75kW
C) Transmission drive: By chains
D) Speed adjustment: By excitation device
E) Conveying belt width: 500mm
2) Crusher:
A) Diameter of rotating knives: 400mm
B) Number of rotative Knives: 5
C) Rotation speed: 500rpm
D) Number of fixed Knives: 2
E) Diameter of sieve plate holes: 12mm
F) Capacity: 350-450kg/h
G) Motor power: 15kW
H) Caliber of the feeding gate: 550 x 320mm

3) Feeding-screw:
A) Screw diameter: 200mm
B) Rotation speed of screw: 25rpm
C) Feeding capacity: 350kg/h
D) Motor power: 1.1kW
E) Screw length: 1, 500mm
4) Floatation machine:
A) Washing pool length: 3, 000mm
B) Pushing-washing screw diameter: 200mm
C) Motor power: 2.2kW
D) Capacity: 350kg/h
E) Water filling control: Automatically

5) Agitating-washing machine:
A) Container diameter: 1, 500mm
B) Agitation speed: 25rpm
C) Agitator motor power: 4kW
D) Capacity: 350kg/h
E) Electric heating capacity: 15kW
F) Insulation layer outside the tank: Yes
G) Water temperature inside the tank: 40-80 degrees
H) Water filling control: Automatically
6) Scrubbing-washing machine:
A) Barrel diameter: 200mm
B) Barrel length: 4, 000mm
C) Capacity: 350kg/h
D) Motor power: 4kW
E) Screw speed: 140rpm

7) Rinsing washing machine:
A) Washing pool length: 3, 000mm
B) Pushing-washing screw diameter: 200mm
C) Motor power: 2.2kW
D) Capacity: 350kg/h
E) Water filling control: Automatically
8) Container unit:
A) Fan-suction motor power: 4kW
B) Container volume: 1500l
C) Discharge control: By valve
9) Electric control cabinet:
A) Required electricity: 3-phase, 380V, 50Hz or as required
B) Brand of electric elements: Such as Siemens

The process of this automatic production line for plastic extrusion and pelletizing:
1) Extruding
2) Water cooling
3) Blow drying
4) Cutting pelletizing