Technical parameter:
1. Output paper: Writing paper, printing paper, newsprint paper.
2. Output weigh: 40-120g/square meter
3. Paper width: 1760mm
4. Net-cage width: 2150mm
5. Design speed: 150m/min
6. Working speed: 60-120m/min
7. Capacity: 8-10T/D
8. The gauge: 2600mm
9. Driving type: Use AC frequency conversion, and driving by step.
10. Pressure type: Pneumatic pressure device
The main equipment structure
1. The mesh part: φ 1500mm× 2150mm 2 net-cages, φ 450mm× 2300mm 3 couch rolls (including 1 turning roll ), shore hardness 38° ± 2, pneumatic compression device, equipped with returning roll device, and attached with 2 pressure mould former.
2. The press part: φ 650mm× 2300mm one stone roll, φ 600mm× 2300mm one rubber roll, shore hardness 95° ± 2(standard height and moderate rubber roll which is processed or textured), and pneumatic compression device.
3. Driving and controlling part: Using of AC frequency conversion, and driving by step, all-digital closed-loop controlling system.
4. Calander and Winding part: 1760mm 3 rollers calandar and 1760mm mesh winding paper machine.
5. Dryer part: φ 2500mm× 2150mm 1 dryer cylinders, φ 1500mm× 2150mm 3 dryer cylinders, ranking type(1+3), φ 600mm× 2300mm 2 carrier rolls, φ 400mm× 2300mm 1 compressed roll, shore hardness 95° ± 2, and pneumatic compression device(standard height and moderate rubber). The cylinder-assemble part has collocated with upper and bottom dryer meshes, attached with pneumatic proofreader and electric blanket-fastener.