The meter is compact in size and low in power consumption and capable of working continuously for no less than 5 hours with a built-in battery. The meter is provided with a built-in USB interface to which a computer can be connected for convenient data reading and storage. It has also a multiple of memory functions. It is a portable meter using clamped- on type transducer.

Single-channel 2-channel 4-channel
Pipe size(mm): DN50-DN2000 DN100-DN2000 DN200-DN2000
Accuracy(%): ± 2.0 ± 1.5 ± 1.0
Flow velocity(m/s) ±0.03-±12
Display: 160*64 digit back-lit liquid crystal simultaneous display of instaneous and cumulative flowrates, and key display of cumulative running time
Immediate data storage mode: Up to 1000sets of data can be readily stored during measurement at any time
Cyclic data storage mode: Up to 1000sets of data can be stored for a tagged pipe according to the set storage cycle and the pipe measured remark
Fluid measured: Water, wastewater and other homogeneous fluids in fill pipe flow.
The power supply of the conversion unit: Built-in 3.6V Ni-MH rechargeable battery with a continuous running time of no less than 5 hours
The power supply of the power adaptor: AC220V output: DC5V
Power of the conversion unit: < 3W
Temp. Of the conversion unit: -10 degree Celsius~+45degree Celsius
Humidity of the conversion unit: < 85%(RH)
Transducer: Medium measured: Temp.: 4degree Celsius~+504degree Celsius
Temp. Of the working environment: -404degree Celsius~+70degree Celsius