BGA Rework Station Features:
1. With PLC user interface control, display actual temperature of three zone and a test temperature curve;
2. With three independent temperature zone control, upper and bottom main heater with hot air to heat, third zone with infrared to preheat;
3. Three heater with 9 segment temperature up (down)+9 segment constant temperature control, can store 40 groups temperature curve;
4. Three heating zone with independent PID to control heating process, more stable and accurate;
5. Bottom heater and IR preheating zone with supporter to prevent welding zone part deformation;
6. After removal and welding with cooling fan to cool PCB board, ensure welding effect;
7. Temperature profile parameter with password protection;
8. Equipped with a variety size of hot-air nozzle, or made according to special requirements;
9. Build-in vacuum pump, no need gas sources.

SPECIFICATION
PCB Size: ≤ L530× W425mm
PCB Thickness: 0.5~3mm
Temperature Control: K thermocouple PID Closed loop
PCB Positioning mode: Outer
Bottom preheat: Infrared 2400W
Main (Top+bottom) heater: Hot air 800W+800W
Power supply: Single phase 220V, 50/60Hz, 4.0KVA
Dimension: L500× W490× H500mm
Weight: Approx. 45kgs