It is semi-rigid suspended, power shift, hydraulically controlled and track-type.

Overall dimensions (L*W*H): 5236*3297*3160 mm
Operation weight: 17.8 t
Flywheel power: 121kW Max. Drawbar pull: 139.6 kN
Ground pressure (at operating weight): 69.2 KPa
Min. Ground radium: 4.0 m Min. Ground clearance: 352.5 mm
Diesel engine
Manufactured factory: SHANGHAI DIESEL ENGINE CO., LTD
Model: C6121ZG05a Rated power: 131 kW
Type: Water-cooled, single-row, vertical, 4-stroke-cycle, turbo-charged
Number of cylinders-bore*stroke: 6-120.7*152.4mm
Total piston displacement: 10.5 L Rated RPM: 1900 r/min
Oil consumption (at rated power output)
Fuel consumption: ??244 g/kW. H Lube oil consumption: ??0.6 g/kW. H
Max. Torque (??1400r/min): ??790 N. M
Starting method: By electric at 24V
Cooling method: Closed circulation water cooling

Torque converter and transmission: Single-stage, three unites structure torque converter. Output power is stable with high performance. Planetary, power shift transmission with three speeds forward and three speeds reverse. Speed and direction can be quickly shifted.

Steering and braking. The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs. The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.

Transmission, steering and braking operation. The operation of transmission, steering and braking is controlled by single lever. Transmission, left and right steering and braking can be realized for three speeds forward and three speeds reverse by one handle.

Final drive. The final drives are double reduction with spur gear and segment sprocket, which are sealed by duo-cone seal.

Undercarriage system. The undercarriage is section steel welded track roller frame with diagonal brace. The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.

Number of track rollers: 4 single-flange on each side 2 double-flange on each side
Number of carrier roller: 2 on each side
Number of front idler: One on each side
Track type: Single grouser, modular type.
Track adjuster type: By hydraulically adjust
Pitch: 203 mm Numbers of shoe: 38 Width of shoe: 500mm
Length of track on ground: 2570mm Sealed and lubricated track (0ptional parts)
The pitch, number of shoes, width of shoe are the same with ordinary track
Implement hydraulic system
It consists of two group gear pump, pilot valve, main valve, cylinders, oil filter and lines

Pump type: Two group gear oil pump Front pump: 190L/min
Pilot pump: 19L/min System pressure: 12MPa
Basic hydraulic system
Pump type: Gear oil pump System output: 135 L/min
System pressure: 2.35MPa
Service refill
Fill location Capacity(L)
Radiator and diesel engine water: 60
Lubricating system of diesel engine Oil: 27.5
Transmission, bevel gear case Oil: 95 Final drive(each side) Oil: 24
Implement hydraulic system Oil: 85 Fuel tank Oil: 230
Track roller, carrier roller, front idler(each) Oil: 0.35

Blade specifications
Width: 3297 mm Height: 1170 mm Max digging depth: 420mm
Max. Ground clearance: 852mm Tilting angle: 8.5"
Blade capacity: 4.5m3
Ripper specifications
Number of shank: Three Length: 1580mm Width: 2020mm
Max. Penetration depth: 550mm Max. Lifting height: 510mm