600W CNC LASER CUTTER FOR CUTTING metaLS.
CUTTING ABILITY: 8mm is the limit! ! !
CUTTING SPEED: 5mm of mild steel with more than 500mm per minute! ! !
ADVANCED OPTICS: MIRRORS 2in DIAMETER with R>99.5%! ! !
ADVANCED OPTICS: LENS 2in DIAMETER with FL400mm! ! !
FOCUS SPOT DIAMETER: DOWN TO 0.035mm! ! !
ACTIVE CARBON FILTER FOR THE FUMES! ! !
HEIGHT SENSOR FOR PRECISE CUTTING! ! !
FINEST CUTTING QUALITY THAN CO2 LASERS! ! !
USAGE HOURLY COST: $3.5 FOR 100% OUTPUT POWER.
FOR VIDEO OF THIS LASER CUTTER IN ACTION VISIT:
For X stroke 1500mm, Y stroke 3000mm, Z stroke 80-150mm, CNC rotary W axis optional
APPLICATIONS
1) CUTTING OF metaLS
1mm at 2000mm/min
3mm at 800mm/min
5mm at 300mm/min
2) DRILLING HOLES in metals
6mm diameter holes at different widths of mild steel
Drills the metals faster and with fine edges.
1mm > 100 holes/min - less than 0.6 sec per hole! ! ! !
3mm > 40holes/min - less than 1.5 seconds per hole! ! !
5mm > 14 holes/min - less than 4.8 seconds per hole! !
3) ENGRAVING metals
You can draw letters or detailed drawings on the metal with beam of 0.03mm diameter.
Speed of more than 15000mm/min
You can engrave photos on the surface of the metal with beam of 0.1mm diameter.
5cm x 5cm area in about 5-30 minutes (depends on the depth of the engrave we want)
4) WELDING metals
Laser beam can melt the edges of 2 metal sheets and bond the 2 metals together.
The final result is perfect. Welding speeds can not be always the same.
There are many factors that influence the welding speed.
The lower speed gives a stronger metal welding.

DEscriptION OF THIS MACHINE
THIS IS A HIGH TECHNOLOGY HIGH POWER - HIGH SPEED LASER CNC CUTTER.
WORKING AREA: 1500mm*3000mm
LASER SOURCE: 600W CW YAG LASER SOURCE with chiller for water cooling
BEAM DELIVERY SYSTEM: 50mm mirror with more than 99.5% reflectivity
FOCUS HEAD: Adjustable beam expander 1X - 4X and 50mm diameter focus lens with air support and air compressor
HEIGHT SENSOR WITH Z AXES INCLUDED
FOCAL LENGTH: Standard 150mm with beam diameter 7 - 28mm
Electronic calculation of Depth Of Field (DOF) and automatic height adjustment of the focus head
Directly from Mach3 with macro command.
ConTROL UNIT: PC and 17in monitor which runs
Output includes buffer interface with optocouplers, opto relays and special designed filter which converts the peak pulse of parallel port to a fine square pulse.
DRIVE SYSTEM (MORE POWER AND HIGHER SPEED)
2 X 1000W AC SERVO MOTORS FOR Y AXIS
1 X 1000W AC SERVO MOTOR FOR X AXIS
1 x 150W AC SERVO MOTER FOR ADJUSTABLE HEIGHT OF THE Z AXIS
SILENT CHAIN ACTUATORS ON ALL AXIS with HIGH SPEED up to 4800in/min (120000mm/min) as OPTIONAL
LINEAR SERVO MOTORS WITH 7200in/min (180meters/min) speed as OPTIONAL
CUTTING ABILITY
The high quality of all optics, the adjustable beam expander which changes the diameter of the spot and the depth of field of the beam and the accurate focusing system gives us the ability to cut metals up to 8mm thick.
MACHINE IS BRAND NEW AND WE MANUFACTURE IT FOR YOU.
only $50, 000.00 (10% DISCOUNT for Agent)
WE NEED 3MonTHS TO DELIVER THIS MACHINE.
We ship the machine by sea to your nearest port.