S-pH3000 Plastic Welding machine is Weld a Plastic Board by a temperature control heater as it base. It is suitable for all thermoplastic materials such as PP-R, PP-H, PP-B, PP-S, HD-PE, PVC-U, PVC-RL and PVDF ect. And S-pH3000 make by high intensity steel frame, so it working stability and precision is very well. The Parts of S-pH3000 is from USA. ERU. And Taiwan. And it is very easily operate S-pH3000 because its controllers is PLC and touch_panel. And it can automatically adjust working parameters. It can welding different plastic materials with different temperature and different air pressure. It dose not need plastic welding rot and welding lines is very nice-locking, high intensity and watertight.

The technical Paramter of S-pH3000
HEIGHT MM: 1120
LENGTH MM: 4280
WIDTH MM: 1860
WEIGHT T: 2
Length of Worktable MM: 2(300/3400)
Thickness of Worktable MM: 20
Worktable Material: Stainless Steel
Distance between press board and work table MM: 45
Length of girder of the press board MM: 3300
Thickness of press board MM: 16

Length of the exothermic knife MM: 3200
Height of the exothermic knife MM: 52
Thickness of the exothermic knife MM: 20
Color and material of exothermic knife: Green Teflon (DUPONT)

Pneumatic Parts;
The brand of Cylinder and electromagnetic valve: Taiwan 4V210 (AIRTAC)
The cylinder of worktable. MM: SC100
The cylinder of the board girder. MM: SDA50
Mainly electric part;
Temp. Controller(OMRON) Type: E5CZ-R2
Time Controller(OMRON) Type: H3CA-8DC24V
PLC(MITSUBISHI) Type: MITSUBISHI
Contactor(MITSUBISHI) Type: S-N10
Relay(OMRON) Type: MY4NJ(24VDC)
Button Brand: SCHNEIDER

The Max. Welding length MM: 3000
Range of the thinness of welding Plastic. MM: 2-30
The Min. Diameter of welding Colum MM: 350
USE CONDICTION;
The pressure of compressed air: 8KM/CM
Voltage V: 380
The Power of the machine KW: 4.5
Current A: 13.5