Wuhan AQUCELL Membrane Technology Co., Ltd.

UF Membrane Modules -AQU250 (10 inch)
Main features:
1. Wall thickness thickening of end cover and reinforced rib explosion-proof design make the pressure bearingg capacity over 1.6Mpa.
2. Central tube structure can make the water be distributed uniformly and the effects of back wash become better.
3. There are two outlets above and below that can back wash both by the two ones.
4. Especially design for quickly, conveniently fixing and good sealing property joint.
5. Stainless steel hoop make sure membrane not metamorphose and slack.
6. There are two kind of material of tube body to choose that can fill more demand of our clients.
7. End seal material: Epoxy resin with high hardness, excellent strength, superior toughness and good hygienism grade.

Technical Parameters:
Overall dimension: Φ 250*1420mm (AQU250A), Φ 250*1740mm (AQU250B), Φ 250*2180mm (AQU250C)
Interface dimension: Φ 63 (DN50)
Connnection Mode: DN50 fast assemblying sleeve connection
Shell material: UPVC
Membrane filament material: Hydrophilic PVC
End seal material: Epoxy resin

Configuration: Hollow fiber
Working Temp.: 5-45centigrade
pH range: 2~13
Max TMP: 0.2Mpa
Continous Tolerance to chlorine: 100ppm

Tolerance to chlorine for short-term: 200ppm
Max inlet pressure: 0.3Mpa
Filtrate turbidity < 0.1NTU
Product water SDI < 1
Removal rate of animalcule and bacterium: : 99.99%
Removal rate of suspendend solids: 100%