1. Be made of hot DIP galvanized steel. It is fire tightness, flame retarded, soundproof, anti-aging
2. The connector by unique design, when you construct the ceiling, it is easy to install and not to be losened or to be detached each part...
3. It is also can be removed and reused without being damaged or without the use of tools.
4. Its suspension holes punched on the main tee and cross tee in order to increase the durability and safety of the lay-in grid suspended ceiling system.

Normal type and size:

1)Grooved ceiling grid tee

Main tee---- 15x35x3600/3660mm
Cross tee--- 15x35x1200/1220mm
Cross tee--- 15x35x600/610mm
Wall angle---- 22x22x3000/3050mm
22x19x3000/3050mm

2)FUT ceiling grid tee

Main tee---- 24x32x3600/3660mm
24x38x3600/3660mm
Cross tee--- 24x32x1200/1220mm
24x32x1200/1220mm
Cross tee--- 24x32x600/610mm
24x32x600/610mm
Wall angle---- 22x22x3000/3050mm
22x19x3000/3050mm
3) Flat tee bar

Main tee---- 24x32x3600/3660mm
24x38x3600/3660mm
Cross tee--- 24x32x1200/1220mm
24x26x1200/1220mm
Cross tee--- 24x32x600/610mm
24x26x600/610mm
Wall angle---- 22x22x3000/3050mm
22x19x3000/3050mm

Thickness: 0.23mm, 0.27mm, 0.30mm, to 0.35mm and 0.40mm

Installation steps:
1. Determine the requirment ceiling level, mark the position and fix wall angle on the wall.
2. Hang main tee with T-bar suspension hook.
3. Insert cross tee to the main tee.
4. Cross tee adjacent to wall angle light fittings
5. Adjust the levels and alignments throughout the entire grid system accurately
6. Install PVC gypsum ceiling tile or othermaterials ceiling panel.