MWW Series Computer Control Type Wood-based Panel Universal Test Equipment
I. Product features
Adopt alternating servo system to control the position. Advanced CMOS chip integrated technology and professionally designed data acquiring mu-factor and controlling software can make the machine stable, reliable and convenient. Controlling software can automatically calculate modulus of elasticity, static bending strength, inner bond strength, surface bonding strength, agglutination strength and so on. Computer control system conforms to the requirements of GB about wood-based panel.
II. Main technical specifications
1. Maximum testing force: 10kN, 20kN;
2. Measuring range of testing force: 0.1-10kN or 0.2-20kN;
3. Accuracy of testing force: ± 1%;
4. Crosshead displacement measurement: 0.01 mm Resolution is higher than 0.01 mm;
5. Crosshead moving speed range: 0.01mm/min-500mm/min, variable speed and arbitrary setting
6. Power supply: 220V± 10% or 380V± 10%;
7. Overall dimension of host machine (L× W× H)(mm): 740× 500× 1680;
8. Weight: 450kg

MMG-5 Rolling Wear and Tear Testing Machine
I. Function:
This machine is mainly used to test the abrasive resistance of wood-based panels. And it is applicable for wood-based panels company and quality testing section.
II. Main Technical Specifications:
1. Maximum force: 5N;
2. Accuracy of force: ± 2%;
3. Rotating speed of the specimen: 60± 2r/min;
4. Maximum size of test piece: L. =110mm± 2mm, W. =110mm± 2mm, or Dia. ∮120mm± 2mm;
5. Distance between specimen surface and cleaner mouth: 1-2mm;
6. Dimension(L× W× H): 240× 350× 300(mm);
7. Weight: 35kg.
III. Main Configuration:
1. Single service position host machine;
2. Permanent magnetism and low moving synchronous machine;
3. Numeral counter;
4. Grinding wheel;
5. Vacuum duster;

MJL-5 Falling Ball Impact Testing Machine
I. Main functions
This machine is mainly used for the impact property test of wood-based panel and veneering wood-base panel and it is applicable for wood-based panels company and quality testing section.
II. Technical specification
1. Maximum impact energy: 5J;
2. Maximum impact height: 1000~1800mm;
3. Maximum weight of the falling ball: 324G
4. Error of the falling centre: ≤ 2mm
5. Specimen size: 230× 230mm