Glass bending tempering furnace:
Clear and float glass
Beckhoff controller
Advanced heating and cooling
Cross bending
Glass bending tempering furnace

Technical data
1. Machine dimension:
Length: Depending on the flat glass furnace
Width: 3.5 m
Force wind room: 40-60 square mete
2. Glass size:
Max. Glass display size (flat): 2440x3660mm
Max. Glass display size (bent): 2440 x 2000mm (Bent at cross direction)
Minimum size of the glass: 400× 400 mm
Min. Radius: 800mm
Glass thickness range: 5 to 19 mm
3. Quality standard: GB9963
4. Finished parts qualification rate: ≥ 96%
5. Output: 15 lots/hour, (Assuming 5mm clear glass)
6. Total power: 880KW, among them:
Power for heating system: 600KW
Force fan: 250KW + 22KW
7. Averyage power consumption: ≤ 6 KW/squre meter (use10mm glass calculate)

Machine main components
The tempering furnace is consisted by loading table, heating furnace, tempering cooling device, unloading table, wind motor, wind blowing system, electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.