Packaging & Delivery:
Packaging Detail:  export carton or at your request
Delivery Detail:  10 days after receipt the deposit
Specifications:
Split pressurized solar water heater(sp-6)/solar
CE, CCC, ISO9001
Ideal for residential and commercial
3 years warranty
Split Pressure Solar Water Heater/Split pressurized solar water heater/split pressurized solar water heater

Material of each part:
1. Inner tank: Enamel/ imported SUS-304/2B stainless steel
2. Outer tank: Pearl plate
3. Vacuum Tube: Borosilicate glass 3.3
4. Controller: Digital full-automatic controller

Tank---Pressurized
1) The upright tank can keep the water temperature at different level. It can heat the top water instantly. The special structure can prevent from the cold and hot water together.
2) The tank is located in the building; The hot water loses less energy than the normal one.
3) Back up with electric heater so that the day without sunshine hot water can also use.
4) Capacity: 80L~300L
5) Inner Tank: Porcelain enamel
6) Outer Tank: Pearl plate 0.35~0.5mm/painted steel-0.5mm/Stainless steel-0.5mm
7) Insulation: Polyurethane foam--50mm/55mm/60mm/65mm

Product specialty:
@ High heat effectiveness: Higher than normal all-glass tube by 10%;
@ Heat-pipe conduction, no water inside, thus it is successfully prevented form the defects of tube blockage and low power output caused by water fouling and deposits or dust and sand;
@ With small thermal capability, it can output power in 2 minutes. The highest temperature of cooling end can reaches 2500C. The average heat efficiency can still be 50% even under -500C.
@ High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube to get higher heat output in cloudy weather and in moist area, especially in winter.
@ Solar collecting plate is installed and sealed inside the tube of high-quality borosilicate glass with 5× 10-2Pa of vacuum, so it cannot be corroded even in moist area;
@ Hot water system can endure 0.6Pa so that it can be connected to tap water tube.