1>water softener

*What is a softener?

Softening by ion exchange resin is the most common and probably the easiest method of removing Hardness ( that is calcium and magnesium) from water and render the water suitable for utility Purpose. As the name implies ion exchange is a process in which undesirable ions are exchanged For more desirable ions.

*What problems are caused by hard water?

Hard water does not lather easily with soap. This causes problems during washing and bathing and Prevents proper cleaning. Hard water can also cause scaling in pipes, fittings and storage tanks. Scaling in geysers can increase the electricity consumption bills. Hard water is also bad for the skin and hair.

How Does a Water Softener Work?

A water softener uses a medium that serves to exchange "ions" of calcium and magnesium with sodium and potassium.

This occurs in four steps:

1. To do the ion replacement, the water in the house runs through a resin bed of small plastic beads or zeolite. The beads are covered with sodium or potassium ions. As the water flows past the ions, they swap places with the calcium and magnesium ions. Eventually, the beads contain nothing but calcium and magnesium, and softening stops. It is then time to regenerate the beads or zeolite.

2. To regenerate, the beads need to regain their sodium or potassium ions by being flooded with a salty, brine solution that is rich in sodium or potassium.

3. once completed, the calcium and magnesium, dirt and sediments are flushed from the beads and into the drain in a process called backwash.

4. The final phase rinses the mineral tank with fresh water and loads the brine tank so it's ready for the next cycle.

Automatic water softeners are usually programmed to recharge at specific times that will not disrupt the occupants. It is more water-efficient to have a metered model that will regenerate only when required.

*What is Regeneration of the Softener

Raw water will continue to get softened till the resin gets exhausted. Bringing back the resin to it Original form is called regeneration. Softener resin is regenerated by sodium chloride of 10 - 15 % Concentration. Depending on the softener design, the regeneration may need to be done every day or Every few days or every week and month

2>Product detail:

The water softening plants offered by us are used to remove the concentration of contaminants so that water become fit for the desired use. Highly effective in removing the hardness salts and impurities, these plants are manufactured in adherence with set industrial norms. These are known for high performance and longer working life and require very less maintenance. Keeping in mind the requirements of different industries, these plants are available in various technical specifications.

3>Applications:

1. Make-up water for boilers
2. Cafeteria-food service
3. Classroom Labs
4. Cooling towers
5. Pools Ice Machines
6. Vending machines
7. Fountain Service
8. Drinking water
9. Facility Use
10. Vechicle Wash