Mainly used for wine, beverage industry of bottle washing purposes, with energy consumption, less water consumption, convenient and reliable use of the advantages of
Bottle head number: 24
Bottle flushing efficiency: 2000-3000 bottle / when
Power: 075kw ( single, three-phase )

CP-24 type washing machine is the combination of domestic and international bottle structure principle according to the current practical needs of users and the new facilities on a External spraying inner impact type red bottle machine, the machine features: Application of 1 material for various models of the old bottle washing.

2. Spray, flushing the inner wall of outer wall of a bottle, bottle clean.
3. The use of tap water or booster pump pressure, wide adaptability.
4. Has the advantages of simple structure, convenient repair, stainless steel water storage barrel, beautiful appearance, corrosion resistance.
5, labor saving, high production efficiency, is suitable for middle and small enterprises.

One, basic parameters

1. Bottle head number: 24
2. 1800-3000 bottles / hour efficiency
3. Motor Power: 0.55KW-0.75KW / 220V
4. Bottle high: 120-360mm
5. 40-90mm bottle diameter

Two, the principle of washing bottle

1. Of the outer wall of a bottle nozzle spray, spray pressure can be adjusted by a water inlet size.

2. Bottle flushing the inner wall of the positioning of flushing, flushing mouth still fixed on the bracket, When the valve body inlet and outlet contact time, water through the nozzle pressure washing bottle Missed the first bottle, the machine uses the pressure of tap water bottle, can also be based on user emand pump pressurized circulating flushing bottle with.

Three, the use of methods

1. Using the first check whether each bottle funnel firmly installed, the water storage barrel water The mouth is connected under the water, then the water inlet pipe connected, confirm the motor wiring intact.
2. Is switched on, start the machine operation, and at the same time the upper bottle and open the water inlet switch (or start the pump ).
3. By adjusting the water to get the right bottle pressure.
4. Stops, closing the inlet switch ( or a water pump), and then cut off the power supply.

Four, maintenance and repair

1. Machine drive worm gas a day,
2. Check rinser a band fastener soundness, motor belt No loose slipping.
3. When the red bottle machine nozzle individual pressure is insufficient or no pressure, with wire poke a few Water spray nozzle, if still not just to remove the spray nozzle for cleaning.
4. When the bottle flushing effect is not good, first check the water pressure is normal, and then check The water pipe is blocked.