Automatic Saw Center

Specifications:
Loading table and bar pusher
Automatic bar loading table of 6 bars of 7.100 mm (1 in working progress and 5 on the loading table).
Automatic pusher bar with a loading speed is 1.3 m/sec.
Other lengths and / or more bars on the loading table on request

Cutting unit:
Cutting unit with saw bade of 500 mm.
Compound angles saw unit between 45° / 90° / 135°
Saw motor of 2.2 kW (optionally 2.95 kW), 2.800 rpm
Automatic positioning device for centering rotation of the cutting mathing with the center of the profile section.

2 vertical and 2 horizontal clamping kits
Compressed air blower and air pistol
Automatic scraps evacuation system
Complete safety gard at the working area
Automatic device for cut bars unloading, pneumatic control clamping cylinder to block and move the cutted piece.
Oil lubrication timer device.

Controller and options:
Industrial controller with static harddisk.
15" Touch screen to operate
USB port
Internet network
Modem for diagostics and self diaganostics facility with intruction manual.
Software
Storage of profile data
Viewing and editing cutting list
importing ASCII format cutting lists
Symmetrical profle cutting (3 cuts for 2 pieces)
Creations of labels for Label printer
Correction of the Profile height

Specifications parts
Depending the saw angle we can define the maxium width in combination with height and visa versa.
The minium lenght of the piece is 200 mm, with use of Label printer the minimum lenght is 280 mm.
The cutting precision is +/- 0.1 mm
pH = Profile Height / PW = Profile Width

Unloading and storage unit
Automatic piece unlaoding device controllerd with pneumatic cylinder. Unloading speed 2 m/sec.
Unloading table for storage cutted pieces.
Optionally conveyer for scrap