O punching cut to length line
Maximum cutting width: 200/300/400mm
Diameter: 450-550mm
O Punching machine
O Punching cut to length line
2011 CANWIN new product
Equipment name Full automatic CNC punching cut to length line.

The basic configuration
CNC feeder Japan YASKAWA servo system
CNC system Japan Mitsubishi system, Intelligent human-machine interface control, Chinese and English menu choices.
O type punching punching mould ≤ 30mm, standard is 12mm, 14mm, 16mm.
Precise cutting maximum shear width (selection)
Automatic centring institutions 50~300mm, cutting width arbitrary adjustable.
Electric feeding machine Toshiba frequency conversion control
Inverter control, infrared inspection automatic feeding
Feeding width 300mm, diameter scope 450-550mm.

Model
Mould size
Sheet width
Sheet thickness
KYDO-150
ID 10~20
50---150mm
0.1~0.5mm
KYDO-250
ID 10~20
50---250mm
0.1~0.5mm
KYDO-350
ID 10~20
50---350mm
0.1~0.5mm.

Specifications
1. Sheet length no limit
2. Sheet width (selection)
3. Single sheet punching number 0~6
4. Thickness 0.5 mm
5. Max feeder speed 24 M/min
6. Length deviation +-0.2mm
7. Angle deviation +-0.025
8. Burr height less than 0.02 mm, circle punching hole &less than 0.03 mm
9. Carbide tool life 1 Millions of times/each grind
10 Compressed air consumption ~2 CBM/min
11. Feeder load 1.0T
12. Feeder coil ID 450-520mm
Coil material requirements
1. Width tolerance less than 0.1 mm/M
2. Burr height less than 0.02 mm/M
3. S degree less than 0.1 mm/M
4. Edge wavy degrees less than 0.5 mm/M
5. Bending less than 1 mm/M
CANWIN AUTOMATIC EQUIPMENT Ltd
CANWIN R&D CENTER.