1. Feature:

The latest practical radial insertion machine, separated multiple sets of servo control system, assure you the steady performance, high density and more perfect. Application software bases on windows 2000 operating system, user friendly interface, bring you better quality and higher efficiency.

2. Specification

1 Insertion rate 18000PCS / H
2 Non-performing rate Less than 300 PPM
3 Insert direction 0° -360° , integral multiple of 1° .

4 Components span Dual span 2.5mm/5.0mm
5 PCB Size (Min)50 mm x50mm(Max)450mm x 450mm
6 PCB thickness 0.79mm-2.36mm

7 Components specification Max body height 23mm, max body diametre 13mm
8 Components available Capacitors, transistors, LED lights, Key Switch, Resistor, Connectors, Wire, Potentiometers, Fuse Block and other vertical tape packed materials.
9 Clinch Length 1.2-2.2MM (adjustable)

10 Clinch degree 10-35° (adjustable)
11 Input stations 60 stations (recommended), 10-100 stations optional
12 Machine Size (L× W× H) 1800mm× 1600mm× 2000mm

13 Station Size: 500mm× 600mm× 760mm
14 Machine Weight: 750kg (40 stations)
15 Power supply 220V, AC(single phase) 50/60Hz, 2.0kVA

16 System Protection UPS, keep machine run 15 minutes without power
17 Working Power 1600W (Energy-saving)
18 Air pressure 0.6-0.8 Mpa
19 Air consumption 0.3 m3/minute

20 Circumstance temperature 5-25°
21 Machine noise 65 dB
22 Coordinate correction Machine vision systems, multi-point MARK vision correction.
23 Driving system AC Servo AC motors

24 Data input USB interface input (EXCEL format)
25 Control System English version interface (WINDOWS system control platform)LCD monitor

26 Component Density High Density Insertion
27 Rotary table Clockwise or anticlockwise
28 PCB transfer mode Manual / automatic optional.