1. Accord with standard DMX512 basis border agreement.
2. Gray level 256, full color drive control.
3. No flash explosion on electricity, high frequency output, low no jitte.
4.3 ways of output channel, the largest single channel 4 AMP driver output, the total output is not more than 12 AMP.
5. Can be free to set the lamps DMX address

The product specification:
1. The power input: DC12-24V.
2. The driver output: < 12A
3. Control channels: 3CH
4. Output the maximum power: 288W
5. Control mode: DMX512
6. Output frequency: > 5kHz
7. Gross product: 230g
8. Packing: 1*50(L364*W334*H158mm)

Product panel instructions, but through the digital tube display the current address, by mechanical switch address regulation, when transferred to address the need, can press lock key lock the current address, if not in the current condition according to lock button, the system 3 seconds self-locking address, needs to address set, according to unlock the first key, and then address set. (according to lock key operation, the third paragraph digital tube small instructions to light corresponding instructions), if in five minutes to switch didn't any operation, then that would destroy the digital, want to see that again, so press a key again to unlock.
With internal since test procedures, numerical set to the address of 511, so the three channels is CH1, CH2, CH3 jump to change, if it's 512 address, so was 7 colour gradual change effect.