Brand:DYS
MOQ:10
Quantity:10
Cables are terminate both ends with connectors of your choice .once terminated we will perform rigorous tests to ensure the cablemeets industry standards.
Test results are supplied with the cable. To avoid damage the fibreis protected with an armoured plastic tube, completely covering theterminated fibres. The tube in turn has a pulling eye so evendifficult cable runs can withstand a greater pulling strain withoutdamage the fibre. We are good at it.
Fiber optic cable can easily be damaged during installation becauseit’s so fragile. Protect it from damage by choosing a cable with apulling eye. The pulling eye ensures that the strength member ofthe cable is pulled instead of the fiber core or jacket. Here’s theeasy way to pull pre-terminated fiber cable use the Pulling Eyekit, Pulling eye kits protect pre-terminated fiber optic cablesduring installation conduits, ducts or risers. Saving time andcosts when install the pre-connectorized multi fiber cable.
Features:
Fibers are terminated with swivel pulling
eyes to eliminate cable damage during installation.
Choose either a PVC or plenum jacket
6 12 and 24 fiber versions are available
All type connectors are available
Makes pulling cable through conduits easier.
Specification:
| Attenuation (Maximum) | 3.75 dB/km @ 850 nm; 1.5 dB/km @ 1300 nm |
| Bandwidth (Minimum) | 160 Hz/km @ 850 nm; 500 Hz/km @ 1300 nm |
| Fiber Type | 62.5-μm core, 125-μm cladding |
| Jacket Material | black , pvc |
| Conductor Material | 62.5/125-μm diameter, all-glass, graded-index opticalfiber |
| Bend Radius | 8 cm loaded; 5.3 cm installed |
| Tensile Strength | 225 lb. (1000 N) short terms, 68 lb. (300 N) long term |
| Buffering Diameter | 900 μm |
| Temperature Tolerance | Operating: (-40 to 80°C) Storage (-40 to 80°C) |
| Outside Diameter | Lie on the patch cords inside the “tube” |
