Wood Sawdust Pellet Mill Overview

Wood Sawdust Pellet Machine is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.

1. Adopt high-precision gear drive,advanced flexible coupling, for high Productive efficiency.

2. Wood pellet machine driving adopt imported SKF(NSK)bearing and NAK oil seal.

3. Frequency converter control feeder flow,full stainless steel feeder ,cover and chute.

4. Special made feeder for stable and even feeding of glass, wood sawdust, stew, hops and so on.

Specification of Sawdust Pellet Making Machine

A:Flat mold biofuels particles machine can produce suppress particles sawdust, straw , chaff. Mainly for sawdust.

B:Use the coldpressing molding technology, polishing plastic process, elegant appearance,compact structure.

C:High output, low energy consumption, low noise, low fault. The machine's fatigue resistance is strong, can do the continuous production, it will be more economy and durability.

D:The machine adopts special high quality materials and advanced even shaft driving device, the key components are high quality alloy steel adds wear-resisting material.

How to Make Wood Pellets From Sawdust

1. Get the raw material ready. Generally sawdust is small enough for pellet making. So the first step is to add water to the sawdust till its moisture content is between 8-15%, which is the best moisture content for pelletizing. But if the raw material is wood chips, they should be pulverized first.

2. Put the sawdust into the pellet machine gradually. Large scale pellet production need a screw feeder to make sure stable feeding of raw material.

3. After pelletized, the sawdust pellets are of high temperature that is not suitable for direct packing. So they should be cooled by pellet cooler.

4. Then, pellets go through a vibrating sieve, where good pellets will be left, while broken ones or powder will be collected for reproduction.

5. After all the above procedures, pellets can be packed with a pellet packing machine.