Casting machine for aluminum alloy wheel
Product Description
Low pressure casting machine is a universal equipment used for low pressure casting aluminum alloy, can be widely used in automobile, motorcycle, instruments, textile machinery and aerospace industry in the production of aluminum alloy castings. Low pressure casting machine by the main engine, hydraulic system, the molten pool type holding furnace, liquid level pressure device.
Application:
low pressure casting machine is special equipment for the production of aluminum alloy castings, it is based on the principle of low pressure casting, aluminum alloy liquid in the holding furnace through the lift tube, pressure into the metal mould of crystallization under pressure and forming, and use the opening and closing mechanism and taking a manipulator and other auxiliary equipment, can achieve 5 bearing type opening and closing action (left and right sides, and the upper die before and after) to produce qualified castings conform to the requirements of the buyer, to realize the whole production process units semi-automatic operation.
| Aluminum holding furnace | |
| Furnace capacity (kg) | 800 |
| Maximum heating power (KW) | 600×400×400 |
| Pneumatic pressure | 1.5bar |
| The minimum test pressure | 2.0bar |
| Max Temperature | 850 |
| Temperature of furnace surface | Room temperature + 50° |
| | |
| Hydraulic unit | |
| Oil volume | 400L |
| Working pressure | 120MP |
| Hydraulic pump displacement | 90L/min |
| Hydraulic pump Power (Kw) | 11KW |
| Hydraulic Cylinders Working Media | Customer specified |
|
|
|
| Electrical control system | |
| Power voltage | AC380V |
| Control system | Siemens S7-300PLC |
| Control cabinet size | 1200x600x2200mm |
| The max aluminum liquid filling speed control | 8 sections |
| To connect with electric power equipment | 80kw |
| |
|
| Machine Parameters | |
| The mould clamping force | 200KN |
| Upper die mould force | 250KN |
| working face floor | 2400x1530x120mm |
| Top die mounting plate | 1100x1100x120mm |
| Fixed on the counter | 2130x1530x120mm |
| Mould installation work space | 1620x1000x1625mm |
| Clamp stroke | 1100mm |
| Installed bottom mold plate and upper die plate | 565-1625mm |
| Edge mould clamping force | 100KN |
| Edge mould mould opening force | 80KN |
| Working stroke of top die cylinder | 1100mm |
| Ejection cylinder stroke | 100mm |
| The max launch force of ejection cylinder stroke | 270KN |
| Manipulator tray rotation Angle | 90° |
| The tray diameter | 700mm |
Our Services
