Price:Negotiable
Brand:SUNFRE Swing barrier turnstile
MOQ:1
Quantity:500

Send Inquiry

swing barrier turnstilegateKeywords: wingbarrier, swing barrier, flap barrier, security wing barrier, safetywing barrier, access wing barrier, access barrier, auto gate, armsgate, arms turnstile, rotate gate, rotate turnstile gate, arm fallturnstile gate, pedestian access gate, traffic gate, waist heightturnstile, half height turnstile, full height turnstile, speedgate, entrace turnstile, entrancegate, turnstile, tripodturnstile, security turnstile, safety turnstile, turnstile gate,access control turnstile, access control gate, accessgate 
I. Scope of Application

A turnstile can realize blockage and access control of apublic passageway. Its mechanical part includes an emergencycontrol device. At the time of power-off, the arms at both wingswill open automatically to offer an access. At the time ofelectrification, the arms will reset. With a variety ofconfigurations, it is fit for all buildings and can solve allcontrol problems at the entrance and exit.

II. Features
1. SUS304# 1.2mm stainless steel rainproof case NC punching, laserboring, a novel and beautiful design;
2. Unique installation surface, guaranteeing simple and convenientinstallation of system integrator’s arm control equipment;
3. LINIX (the best micro-motor brand in China) brushless DC motoris used and its surface is plated with dichromate;
4. Programmable turnstile control, in one or two directions (set byuser);
5. Pedestal is fixed by using expansion bolts.III. Introduction to the Brushless DC Motor
    Motor parameters: 45 ZW N24-30/60JBReduction gearboxnumberOutput power: 30 stands for30WRated voltage: 12 stands for12VRotor magnetic material code: N stands forNd-Fe-BProduct Name Code: Z stands for DC, Wstands for brushless  1.Technical parameters 1.1 Structure: 304#/2.0mm inthickness, round stainless steel enclosure1.2External dimensions: Main column diameter:169mm1.3 Weight: 40kg1.4 Lengthof rotating arm: 500mm-900mm (or customized)1.5Maximum load of rotating arm: 30kg1.6 Rotatingangle of rotating arm: 180°1.7 Rotating direction:two directions 1.8 Power supply: AC220 ±10%V/50±10%HZ1.9 Driving motor: brushed DC motor(12V)1.10 Input interface: dry contact signal or12V level signal or 12V pulse signal with a pulse width ≥100ms;driving current ≥10mA1.11 Communication interface:RS485 standard; communication distance ≤1200m1.12Passage speed: 40 persons/minute (constantly open); 25-30persons/minute (constantly closed)1.13 Arm openingand closing interval: 1-2s
1.14 Time needed to enter the passage state after power on: 3s
1.15 Time for automatic reset in case of trouble: 10s
1.16 Working environment:       Indoor, outdoor       Temperature: -10°C-50°C         RH: ≤90%, nocondensation 2. Main functions andfeatures  1) Its troubleself-inspection and warning functions make user’s maintenance anduse very easy; 2) The equipment’s running statemay be programmed by the built-in small panel on the master controlboard; 3) Mechanical structure can preventoperators from being clamped or wounded. As a rotating arm isblocked in the process of reset, the motor will stop working withinthe specified time. The arm will reset again (until it is reset)after defaulted time delay and the strength is small(≤2Kg); 4) Access locking: rotating arm is lockedautomatically before an opening signal is received.5) Rotating arm synchronization (for doublearms);6) Automatic reset: if a person fails topass within the specified time after the turnstile is opened, thesystem will cancel authorization of this accessautomatically; 7) The turnstile may be set asconstantly open or constantly closed in order to meet requirementsof different sites; 8) Induction or time delaywill reset automatically in 5 seconds (settable) after opening;and 9) Rotating arms open automatically in case ofpower failure while they close up at the time of electrification,satisfying the fire protection requirements. 

Swing Barrier, Access Barrier Gate