Brand:GUYI
MOQ:500
Quantity:100
Ceramic glazedfloor tile 1114A/2213AB/JAB11
Size: 30x30cmProducts Features:1. Good ceramic material fired underhigh temperature of 900C. 2. Water absorption less than8%.3. non-slip.Sequence Number | Test Item | Test method | Provisions of standard | Test Result | Judgement | ||
1 | Dimensions and surface quality | ||||||
Length and Width |
ISO10545-2 | The deviation,In percent,of the average thickness of each tilefrom the work size thickness :±0.6% | -0.04%~ 0.11% | pass | |||
thickness | Average size |
ISO10545-2 |
------- | 8.6mm | ---- | ||
Deviation | The deviation, in percent , of the average thickness of eachtile from the work size thickness : ±5% | -1.40%~ 2.33% | Pass | ||||
Straightness of sides | ISO10545-2 | The maximum deviation from straightness ,in percent, related tothe corresponding work sizes: ±0.5% | -0.10%~ 0.10% | pass | |||
Rectangularity | ISO10545-2 | The maximum deviation from Rectangularity in percent, related tothe corresponding work sizes: ±6% | -0.27%~ 0.30% | pass | |||
Surface flatness | Centre curvature | ISO10545-2 | Centre curvature , related to diagonal calculated from the worksize: ±0.5% | 0.26%~ 0.31% | pass | ||
Edge Curvature | Edge curvature, related to the corresponding work sizes:±0.5% | -0.20%~ 0.17% | pass | ||||
warpage | Warpage, related to diagonal calculated from the work size:±0.5% | -0.21%~0.09% | pass | ||||
Surface quality | ISO10545-2 | A minimum of 95% of the tiles shall be free from visible defectsthat would impair the appearance of a major area of tiles. | pass | pass | |||
2 | Physical properties | ||||
Water absorptio |
ISO10545-3 | Average : 6% |
Average:7.8% Individual minimum:8.2%
| pass | |
Breaking Strength |
ISO10545-4 | Thickness≥7.5mm ,Not less than 800 | 1040N | pass | |
Modulus of rupture |
ISO10545-4 | Minimum 18MPa, Individual minimum 16MPa | Average:32.8MPa Individual minimum:31.8MPa | Pass | |
Resistance to surface abrasion of glazed tiles
|
ISO10545-7
| Report abrasion class and cycles passed | Class 2 failure visible at 600 revolutio | ---- | |
Coefficient of linear thermal expansion from ambient temperatureto 100°C | ISO10545-8 | est method available |
| ---- | |
Thermal shock resistance | ISO10545-9 | Test method available | Fully resistant | pass | |
Moisture expansion | ISO10545-10 | Test method available | <0.01% |
-- | |
Crazing resistance | ISO10545-11 | Required | Fully resistance | pass | |
Frost resistance |
ISO10545-12 | Required | Fully frost resistance | pass | |
30x30cm_Ceramic_floor_tile JAB11
Ceramic_glazed_floor_tile_1114A
Ceramic_glazed_floor_tile_2213AB
Non-slip kitchen ceramic floor tile
