MOQ:1
Quantity:2
This series machine adopts advanced technical, CAD advanced design method, good static and dynamic rigidity to sure of operation safety, long service and good efficiency. This machine can carry out the following operations on the materials of ferrous metal, nonferrous metal and part non-metal int. and ext. Cylinder turning, taping, curving or inch and kinds of complex swiveling surface can be carried out on the machine.
Name | Value |
Max. turning diameter (mm) | 8000 |
Table diameter (mm) | 5700/6000/6300/7100 |
Max. working height of workpiece (mm) | 4000/4500/5000 |
Max. weight of workpiece (t) | 100/125/150 |
Travel of tool post Horizontal (mm) | -50~4400 |
Cutting resistance of right tool post (KN) | 80 |
Cutting resistance of left tool post (KN) | 63 |
Max. torque of table (KN·m) | 460 |
Travel of ram Vertical (mm) | 2000 |
Power of main motor (kw) | DC132 |
Rapid traveling speed of tool post (mm/min) | 3000 |
Table guide | hydrostatic |
Moving degrees limit of tool post (º) | -15~ 30 |
Feed range of tool post(mm/min) | 0.5~500 |
Speed range of table (r/min) | 0.2~20 |
Sectional size of tool bar(mm) | 70×70 |
Weight of machine (t) | 215/300 |
Overall dimensions(L×W×H)mm | 14500×9500×8800(9300) |
This series machine is double column vertical lathe, it''s suitable of finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving of the ferrous, non-materials with hard alloy, ceramic, high capability and high speed steel tools.
