MOQ:1
Quantity:25
It is for automaticremoving uneven or irregular edges of compressor casing which isnot flat enough for automatic robot welding after it is initiallyformed from the casing drawing equipment. It is an automatic metalcutting equipment for special shape of casing, the drawing-formedparts like casing or shell have the uneven edges which shall beremoved .
PRODUCT | Surface Parallelism (mm) | Capacity perminute |
Compressorcasing | 2mm~2.5mm | 4to 5 PCS |
Tank | 2mm~2.5mm | 4to 5 PCS |
Earphoneshell | 2mm~2.5mm | 4to 5 PCS |
Ovenpanel | 2mm~2.5mm | 4to 5 PCS |
Irregular workpiece | 2mm~2.5mm | 4to 5 PCS |
2. Required Labors: oneworker who has lower education level is enough because the job itonly to put the un-finished product on the worktable and take thefinished from it.
3.It has DELTA OR OMRonPLC CONTROLLER.
4. Power supply: 380V 50HZAC; Power ration: 5.5 KW.
5. Compressed air supplypressure: 0.5~0.8 MPa
6.Hydraulic pressure: 25Mpa.
7.Power Supply and Consumption: 380V 50Hz 3phase AC and2KW
8. Equipment size: Lengthx Width x Height=1500x1200x2850(mm)
9. Equipment weight: 2520Kg
