Brand:JTT
MOQ:2000
Send Inquiry
anchor head wedge
1.Type:KM series anchorage and wedge
2. For the round and flat anchorage
3. Suitable for prestressing works
anchor head wedge 1.Type:KM series anchorage andwedge
2. For the round and flat anchorage; range from 1to 55holes
3. Suitable for prestressing works4. Size for pcstrand: M13 applies to 12.7mm, 12.5mm & 12.9mm pcstrandM15 applies to 15.2 or 15.24mm, 15.7mm M18 applies to17.8mm pc strand M22 applies to 21.6/21.8mm pc strand M11applies to 10.8mm pc strand M10 applies to 9.3mm, 9.53mm pcstrand; M7, M6, M5 apply to 7.0mm, 6.0mm, 5.0mm spiral ribbedpc wire. 5. Other Parts for the pc strand: anchorring/plate, base plate, sprial bar, bellows/corrugatedpipe etc. 6. KM anchorage andwedge KM anchorage system is a completed, independentbuilding measure researched, IT has been widely adoped by modernconstruction, especially used in pre-tension or post-tension forconcrete constructions as building materials. KM Seriesproducts are composed of tensioning anchor, holding anchor,connectors. It can be used to lock the steel strand wires on/underclases of 2000MPa standard strenght, which is usually in diametersof 12.7mm12.9mm15.2mm15.7mm. It has been verified bypractice that various type of KM anchor also can be used forthe different kinds of strand wires produced according toASTM/BS/JIS/JIG/AS and other international strandards respectivelyonly if its technical parameters shall marry the related detailmaterials. We have our own anchor and wedge productionbase, our annual output is more than 2,000,000 sets. Enquiry pleaselet us know your quantity, spec., hole quantity etc... For anyfurther information,pls feel free to contact us Contactperson:TiffanySkype:tiffany8907281Tel: 86-13512802538 anchor headwedge
