Specifications:

• Specifications 2013 Hot Sale CNG Conversion Kits PG-K Injector 1.Simple structure 2. Complete variety&specification 3. Longworking life

Description:

  

Packaging & Delivery

Packaging Details: standard export packing

Delivery Detail: 5-7 days after confirm yourorder

Specifications

CNG/LPG common rail chemical injection valve

1. ISO9001 QCT809-2009

2.good technology, simple structure, assembleeasily                

Description

Injection valve and rail, commonly known as injector rail,a keycomponent of gas vehicle multi-point electronically controlledinjection system, includes solenoid valve, nozzles and rail bodyetc. The nozzles mounted inside the rail body, quantity is equal tothe number of engine cylinders. The injector rails are suitable forall types of engines and vehicles.

Advantages

1.Simplestructure                                       

2.Long working life

3.Complete variety andspecification        

4.Shorter response time

Features

1.Meet the QTC809-2009 standard and ISO9001:2008.

2.Applying to liquefied petroleum gas and compressednature gas.

3.Applying to car, bus and truck (CNG, LNG and LPG fuelsystem).

4.High quality can be comparable with the Italy brand"RAIL" , "AEB" or"BRC".                  

Each product  must be tested in theprocess of producing, completion, and delivery.

5.The types include 1-cylinder, 2-cylinders, 3-cylinders,4-cylinders, 6-cylinders and many others.

6.Single version with a short stroke, gas injection can becontrolled precisely.

7.Meet National IV emissionstandard, good fueleconomy.

8.The unique structure, convenientto clean and maintain, accessory parts can be changed

separately, low repairing cost.

 Above is just one of our products, wealso can do kinds of similar products with your design andrequirements, such as CNG injector with 1 cylinder, 2 cylinders, 3cylinders, 6 cylinders and other different technicaldata.

         We are a Chinese manufacturer , having abundant exportingexperiences at kinds of AUTO gas parts (CNGLNGLPG injectors etc.),including the QTC809-2009 standard and so on . If you intersted any, please contact us freely .

 

TECHNICAL DATA
Item No.	PG-K1 PG-K3	Cold start peak current	8.0A (one time permit)
Working pressure	From 0.5 to 3.5 bar	Response time	Open≤2.0ms, Close≤2.0ms
Max pressure	5.0 bar 4.5 bar	Working life	≥400 million times or 100 thousandKM
Working temperature	-40°C~120°C	Suggested holding current	1.0A
Store temperature	-20°C~80°C	Burst pressure	≥1.6Mpa
Fuel type	CNG, LNG, LPG	Inlet gas fitting	M12×1, Φ10mm (standard) orΦ16mm
Peak current time	3.5ms±3%	Electrical Connection	DJ7021-1.5-21
Coil resistance	3.0±0.2Ohm(20°C)	Calibrated hole range	1.5mm(standard)~3.5 mm
Working voltage	6V~12V	Logo	It can be choosed bycustomers
Peak current	8.0A	Color	It can be choosed bycustomers

Injector Rail outlet gas fittingspecification and corresponding engine power:
Outlet gas fittingspecs.	Single cylinder power(HP/CYL.)
Nozzle ø(mm)	Min.	Max.
1.5	12	16
2.0	17	22
2.5	23	30
3.0	31	38
3.5	39	50