Specifications:

• Specifications CNG Car Conversion Kits 3 Cylinder Injector 1.Simple structure 2. Complete variety&specification 3. Longworking life

Description:

 

Workingpressure	From 0.5 to 2.5bar		Responsetime		Open≤3.0ms,Close≤2.0ms
Maxpressure	3.0 bar		Workinglife		≥400 million times or100 thousand KM
Workingtemperature	-40°C~120°C		Suggested holdingcurrent		2.0A
Storetemperature	-40°C~120°C		Burstpressure		≥1.0Mpa
Fueltype	CNG, LNG,LPG		Inlet gasfitting		M12×1,Φ10mm (standard)or Φ16mm
Peak currenttime	3.5ms±3%		Outlet gasfitting		M10×1,Φ6.5mm (outerdiameter)
Coilresistance	3.0±0.2Ohm(20°C)		Calibrated holerange		1.5mm(standard)~3.5mm
Workingvoltage	6V~12V		Logo		It can be choosed bycustomers
Peakcurrent	4.0A		Color		It can be choosed bycustomers
Injector Railoutlet gas fitting specification and corresponding enginepower:
Outlet gas fittingspecs.		Single cylinderpower (HP/CYL.)
Nozzleø(mm)		Min.		Max.
1.5		12		16
2.0		17		22
2.5		23		30
3.0		31		38
3.5		39		50

Packaging & Delivery

Packaging Details: standard export packing

Delivery Detail: 5-7 days after confirm yourorder

Specifications

CNG/LPG common rail chemical injection valve

1. ISO9001 QCT809-2009

2.good technology, simple structure, assembleeasily                

Description

Injection valve and rail, commonly known as injector rail,a keycomponent of gas vehicle multi-point electronically controlledinjection system, includes solenoid valve, nozzles and rail bodyetc. The nozzles mounted inside the rail body, quantity is equal tothe number of engine cylinders. The injector rails are suitable forall types of engines and vehicles.

Advantages

1.Simplestructure                                       

2.Long working life

3.Complete variety andspecification        

4.Shorter response time

Features

1.Meet the QTC809-2009 standard and ISO9001:2008.

2.Applying to liquefied petroleum gas and compressednature gas.

3.Applying to car, bus and truck (CNG, LNG and LPG fuelsystem).

4.High quality can be comparable with the Italy brand"RAIL" , "AEB" or"BRC".                  

Each product  must be tested in theprocess of producing, completion, and delivery.

5.The types include 1-cylinder, 2-cylinders, 3-cylinders,4-cylinders, 6-cylinders and many others.

6.Single version with a short stroke, gas injection can becontrolled precisely.

7.Meet National IV emissionstandard, good fueleconomy.

8.The unique structure, convenientto clean and maintain, accessory parts can be changed

separately, low repairing cost.

 Above is just one of our products, wealso can do kinds of similar products with your design andrequirements, such as CNG injector with 1 cylinder, 2 cylinders, 3cylinders, 6 cylinders and other different technicaldata.

         We are a Chinese manufacturer , having abundant exportingexperiences at kinds of AUTO gas parts (CNGLNGLPG injectors etc.),including the QTC809-2009 standard and so on . If you intersted any, please contact us freely .