Description:
1, Safe and free maintainance2, 500-1000 times of life time
3, lowest self-discharge rate
specification
| brand | trustfire |
| current range | 1100mah -1500mah |
| for the battery | 18650, 25500, 26670, 26650, 23650 |
| model | tr-008 |
| function | intelligent |
32650Intelligent Charger
1.this charger is constant currentPWM intelligent charger.
2.this charger can make thebattery keep stable charging current in a certain voltage range.itis big current style charger, it will stop charging itself whenfully charged.
3.charging current:from startingto charge to finish charging, charging current ranges from 1100mahto 1500mah(battery internal resistance will affect the chargingcurrent, until it is full of electricity, fullness rate is99%-100%)
4.the charger inside using PWMcontrol mode charging, using visualized LCD display, it is highvoltage and big current constant current charging.it can achievethe purpose of rapid charging.
5.the voltage of the batteryshould ensure above 0.8V, if the battery''s voltage is lower thanthis voltage, this charger can''t charge the battery, it should useother way to make the battery''s voltage above 0.5V.then use thischarger to charge the battery.
6.usage:
(1).first, the battery typeselected switch should tune to the corresponding position, functionselected switch tune to C, then the charger can normallywork.
(2).the charger connected to theelectricity supply, LCD on, the screen shows our company logo,after 2 seconds to enter standby mode, now the screen showsStandby.
(3).put the battery into thecharging slot, good contact for its electrode and charging piece,LCD screen shows charging, the corresponding position shows batteryicon, in addition, the electricity grid on the icon will flash,means the battery is being charged status, the left screen willdisplay corresponding battery type.
(4).when the switch tunes to3.0V, the charger can simultaneously identify 3.0V lithium ironphosphate batteries and 1.2V ni-mh batteries
(5).When charging, due to thecharging current is bigger, the charger will have a certaintemperature, it is a normal phenomenon.
(6).when battery is fullycharged, the electricity grid on the icon will show full and stopflashing, means the battery is fully charged.
(7).The charger is with antibattery inversion circuit, it can protect the battery and chargerfrom damaging because of battery inversion.
(8).The charger can charge 18650,25500, 26650, 26700, 32650 type batteries.
(9).the charger can charge 1.2Vni-mh batteries, 3.0V lithium iron phosphate batteries and 3.7Vli-ion battery, charger should be tuned to the correspondingposition when used.
(10).when battery selected switchtunes to 3.0V, the charger can simultaneously charge 1.2V ni-mhbatteries, 3.0V lithium iron phosphate batteries, in addition, LCDscreen will show the type of being charged battery.
(11).the charger will identifythe being charged battery, and will show on the right LCDscreen.
(12).the charger has the functionof supply electricity outwards(moible power) through therechargeable battery, end charging slot donot have the function,when using the function, function selected switch tunes to O, USB2.0 male head inserts into USB output port.then the charger cansupply electricity to cellphone and so on mobile devices. thecharging current can be 1A.
More images
