Description:
Receives the programmed orders from the control panel and controls2 groups of the output signals in order to setup the equipmen
ProductOverview
Applied withadvanced MCU single-chip micro-processor, Surface Mount Technologyand 2 wires non-polarity Input, the Output Module OM611 possesses 2kinds of encoding methods both auto-encoding of the controller andelectro-encoding of the address encoder. It also has the functionof auto-measuring Voltage between both ends of the module. Thismodule is used together with the Intelligent Fire Alarm ControlPanel OZH4800. The auto-encoding method can take reference to theInstruction of the Control Panel. And the electro-encoding methodcan take reference to the Instruction of the electronicencoder.
The OM611 Output Module receivesthe programmed orders from the Control Panel and controls 2 groupsof the Output Setup signals: All-time ON signal and All-time OFFsignal, in order to setup the field linkage equipments. Then itreceives 2 Feedback signals sent by the linkage equipments afteraction and transmits the signals of Setup and Feedback back to theControl Panel showing the location of the signals, meanwhilelighting the indicator.(Blinking green at normal checking time andBlinking red continuously when Setup andFeedback)
Specifications
Operating Voltage: Bus line DC24V,Distributing line DC24V
Consuming Current of Relay Setup:< 15mA
Standby Current:<0.3mA
Alarm Current:<0.6mA
Capacity of the Interface: DC24V,1A
Range of the address:1~192
Size: 96×65×37mm (length × width ×height)
Wires: two Bus lines (ZX, ZX), twodistributing lines
ApplyingEnvironment:
Temperature:-10°C~5°C Relative humidity≤95%(40°C±2°C)
