Description:
SHEAR WRENCH for M12, M16 TC Bolts1 Made in Japan
2 Double Insuration with CE mark
3 Ergonomic Design
4 Light Weight
Tools for tightening HEXbolt
You could see a lot of imitationtools which is similar to TONE.
However the authentic model is onlyone. THIS IS IT.
Because TONE as "MADE INJAPAN" is one of the pioneers of SHEAR WRENCH.
You can experiencethe authentic quality when you grab it.
You won''t regret with theauthentic one.
Model | GM-161EZ(115V) / GM-162EZ |
| Frequency | 50-60Hz |
| Rated Voltage (Single Phase) | 115V / 230V |
| Max, Current | 10A / 5.5A |
| Rated Input Power | 1100W |
| Intermittent operation | 2s / 3s |
| Rated Max, Torque | 294N.m (217lbf.ft) |
| No-Load Speed | 29min-1(rpm) |
| Sound Pressure Level | 87dB(A) |
| Acoustic Power Level | 98dB(A) |
| Vibration Level | 2.5m/s2 or below |
Adaptable Bolts Dia, S10T A325 A490 | M12, M16 5/8" 5/8" |
| Weight (Main Body) | 3.7kg (8.1lbs) |
| Protection Class | Double Insulation (class 2 tool) |
Our quality tools have beenmade by the process mentioned as below:
All of the process are done by the<POWER of MADE IN JAPAN>.
STEP 1<DEVELOPMENTPOWER>
Our tool has been developed dayand night since 1938 by our R&D
STEP2 <TECHNICAL POWER>
Our quality tools have been manufactured by well trainedcraftsman.
STEP3 <QUALITYPOWER>
This is because our tools are known as quality and reliable one,
All of tools has been tested completely by internationalstandard before the shipment.
<ISO>
Our company acquired ISO-9001 and ISO-14001 as below:
You can experiencethe authentic quality when you grab it.
<NOTE>
Our quality tools are notonly above tool but also HAND TOOLS as well.
All of "TONE TOOLS" areshown on our website as below:
http://www.tonetool.co.jp/
We look forward tohaving any inquiry from you!!
