Description:
1.TUV. FDA, CE, ISO13485;ISO9001 Approved.2. Polyester casting tape
3.Export to 28 countries
4.Free Samples
Kangda Brand orthopedic polyester casting tape whichis one new medical bandage substitutes of the plaster bandage/P.O.P bandage is used for orthopedic shaping /moulding, whichconsists of a knitted fiberglass fabric and water-activatedpolyurethane resin.
Characteristics
It is one new subtitute of the traditionalplaster bandage
Character of new medical bangdage(orthopediccasting tape )
Be used in orthopedic molding and fixing
1 Molding fast
It begin to mold after opening the packageand inmmersing into the water, 20 mins later, it can bearweight , but the plaste bandage need more hours for thecomplete molding.
2 High hardness and lightweight
More than 20 timesharder, 5 times lighter and use less than the traditional plasterbandage
3 Good air pemeability
Unique kintted netstucture make the bandage many holes in the surface to keep goodair ventilation and prevent skin damp, hot&pruritus.
4 Excellent X-rayradiolucence
Excellent X-ray radiolucence make it convenient to take X-rayphotos and to check the bone healing without removing the bandage ,or the plaster need do remove it .
5 Water-proof
The mositure absorbed percent is 85% less than plaster bandage ,even on the
situation ofthe patient touching the water, it still can keep dry in theinjured part.
6 Environment friendly
Material are environmental friendly , which can not producepolluted gas after being burn down.
7 Simple operatinon
Can bedone under the room remperature and use the room temperature waterand doctor can complete the operation in short time.
8 Can be used in first-aid
Specification and Size
2in KD002 5.0cm×360cm 10Rolls/Box
3in KD003 7.5cm×360cm 10Rolls/Box
4in KD004 10.0cm×360cm 10Rolls/Box
5in KD005 12.5cm×360cm 10Rolls/Box
6in KD006 15.0cm×360cm 10Rolls/Box
Operation
1. Put on the padded covering in the affected body part, and twinewith the cotton paper.
2. Wear surgical gloves.
3. Before opening the package, choose the roll of proper size.
4. Immerse the roll in room temperature water for 2-3seconds and squeeze it 2-3 times.
5. Wrap spirally, overlapping the previous layer by one-halfor two-thirds the width of the roll. Just 3-4 layers provide astrong non-weight-bearing cast and 5-6 layers are typicallyadequate for weight-bearing cast.
6. KangdaCast is sufficiently cured to pervert furthermolding in 3-5 minutes after immersion in the water. Allowabout 10 minutes for sufficient cure and let patients do notmove during this time.
7. KangdaCast may be windowed, trimmed or removed with traditionalcast saw equipment.
Precaution
Please apply the surgical rubber gloves when you operate theproduct.
When the resin is stuck to operator, please wipe it out with cottonswab with acetone.
Recommended Amount of Usage
Size Use
2in Childrens hands, fingers, and toes
3in Childrens wrists, ankles, and arms and legs
4in Childrens legs and ankles, adults hands and wrists
5in Adults arms and legs
6in Adults arms and legs
Storage
Be careful not to break the package.
Store KANGDA Cast at room temperature.
Damaged products by careless handing cannotbe replaced.Please handle and store them carefully.
The shelf life of KANGDA Cast is 3 yearsfrom the day of production.
Pictures Show
1,
2,
3,
4,
5,
