Price:Negotiable

Send Inquiry

Description:

OPGW tension set
simple structure tension set
convenient installation tension set
ios9001 CE
fiber optic cable tension set

 

Specifications

Tension set Dead-end for ADSS cable
1.Least wear;
2.Easy installation;
3.Special design;
4.Reduce vibration.

Function

ADSS preformed rods tension clamp is used for ADSS cable route’sfixing and anchor shackling. Usually installed on the terminaltower, tight tension tower and intersection angle tower ect.

Feature

The holding strength of preformed rods tension clamp to opticalcable can reach over 95% of cable’s limit RTS without the effectsof stress concentration and vibration stress.

Composition

Each preformed rod tension clamp sleeve consists of inner rod,outer rods and suspension link ect.

Customers can choose other link fittings such as clevis,connecting rod ect. if necessary.

Customers can also choose materials of tension clamp such asaluminum-clad steel rod and galvanization steel rod.

 

Partial model parameters:( tension set )

model	**Length of rods		Holding strength (KN)	Failing load (KN)	Span (m)			Color code	Estimate weight (kg)
	Inner (mm)	Outer (mm)			Wind speed 42m/s	Wind speed 35m/s	Wind speed 25m/s
*SHN-AXXXX/025	1500	1100	25	≥70	200	250	300	black	2.5
SHN-AXXXX/035	1700	1150	35		250	300	450	black	3.0
SHN-AXXXX/045	1900	1250	45		400	500	600	black	3.5
SHN-AXXXX/060	2100	1350	60	≥100	450	600	750	black	4.0
SHN-AXXXX/070	2300	1400	70		650	750	850	black	4.5
SHN-AXXXX/080	2500	1500	80	≥150	750	850	950	black	5.0
SHN-AXXXX/100	2800	1600	100		800	950	1100	black	5.5

Notes: In the model column, SH represents theseare Shihui company’s

Products, A represents these products are for ADSS opticalcable. XXXX means cable’s diameter (unit: mm)×102 , Use“0” ahead when it is less than 4 figures, e.g.: Cable’s diameter is12.85mm then we need to write 1285. Three figures after “/” meanthe holding strength of tension armour (unit: KN), and use “0”ahead when it is less than 3 figures. 

Preformed rod tension clamp can be made up of aluminum-cladsteel and galvanization steel according to the function and thecustomer’s needs.

In order to make sure the well cooperation of tension clamp andoptical cable, besides the named model, you should give cable’sdiameter, RTS, cable’s elastic modulus magnitude and clampmaterials required when you give the order. 

 

tension set