Description:
1.universal gear hobbing machine 2.automatic cycle cutting singlegear index 3.accuracy 7 or 8 step 4.static pressureuniversal gear hobbingmachine
Features
The cnc cutting machine is suitable for machining the straightgear, spiral gear, cylindrical gear and worm wheel etc. Theherringbone gear withoutrecess can be machined by end milling cutter and in cooperationwith reversing mechanism.
1. endmilling cutter The end milling cutter used for singlegear indexing and disc milling cutter used for automatically cyclemachining and also for single gear indexing by singlebutton.
2. highaccuracy The accuracy is not less than 7 grade bygear hobbing process and 8 grade by single gearindexing.
3. tablecentring The table centering is by means ofhydrostatic bearing and press oil supplied through gear oildivider. The single worm transmitting used for Y31500 machine andthere are two mate setting washes.
4. V57silicon Main motor is DC motor and adoptingV57silicon speed control system.
5. doublepitch worm The double pitch worm used for machinethen no necessary to adjust the worm in radial and get good matingcondition.
6. programmable controllerThe machine is controlled by programmable controller and makes theall automatic cycling process variable and reliable.
Parameters
Item | Y31500A | Unit | |
Max work piece diameter | With rear | / | mm |
Without rear | 5000 | mm | |
Max modulus | Steel | 30 | mm |
Cast iron | 40 | mm | |
Finger–type milling cutter | 65 | mm | |
Max machining width | 1800 | mm | |
Max diameter/length of hob | 400/500 | mm | |
Worktable diameter | 3700 | mm | |
Hob main axis turning number | 5.5-40 | r/min | |
Arbor diameter | 40/50/60/70/80 | mm | |
Worktable max carrying capacity | 65 | mm | |
Knife rest vertical travel | 2000 | mm | |
Main motor | 37 | k w | |
Spindle taper | Metric 100 |
| |
Worktable aperture | 1000 | mm | |
Size (length × width× height) | 13810×5070×5500 | mm | |
Weight | 109 | T | |
Picture
