Description:
1.Furnaces are designed in such a way to reduce the FuelConsumption.2.Better heat transfer rate through circulation& Re-circu
Product Name : Drier
Technical Name : Oven,Drier, Paint drier, Sand Drier
Application : SandDrying, Paint Drying, Core Drying, Moisture Removal, Mould Drying,Ingot Heating, and Ingot Mould Drying, Garnet Drying, Clay Drying,Fire Clay Curing, Refractory Curing, and Many More.
Product Description : Acubical shell drier, which is a customized design based on theapplications, temperature requirement for these applications varyfrom 100C to 300C. Driers are also designed with Direct and Indirect type Driers. Drier islined with Refractory and Insulation brick/ Glass wool insulationsto hold the Temperature up to 600C. Driers will have two chambersin case of indirect type drier. The chambers are firing and HeatingChambers. If in case of Direct type drier, the re circulation fanmust be used for the forced heat transfer.
Advantages : Our Furnaces aredesigned in such a way to reduce the Fuel Consumption.Ourfurnaces are lined with both refractory bricksand Ceramic fibre modules, in such a way to pass the flueGas around the material to be heated, enabling high conductionconvection and Radiation heat transfer. Combustion/HeatingEquipments are designed to meet the requirements of furnaceand Heat transfer rate. Burner will be positioned inclined to anangle, so that the flame/flue skips on the surface of thematerial. Better heat transfer rate throughcirculationand Re-circulation. Our furnaces are designedfor skin temperature of65C(Maximum).
Specialties : ManualOperating Furnace AutomaticOperating furnace Air/Fuel ratio Regulating system
Mass Flowcontrol System PressureBalancing System Flue Control System.
Optional Accessories : Preheating the scrap before charging can bedone. Recuperatorto pass the combustion air into the Burner ata temperature of 150C (Minimum) for fuelsavingupto 40%.
Heat Generated By :Light Oil/HeavyOil/Furnace Oil/ NaturalGas/CNG/LPG/Propane/Butane/Bio Gas/Producer Gas
