Send Inquiry
Description:
1.Furnaces are designed in such a way to reduce the FuelConsumption.2.Furnaces are designed for skin temperature of 65C MaxProductName : Drier TechnicalName : Oven, Drier, Paint drier, SandDrier Application : Sand Drying, PaintDrying, Core Drying, Moisture Removal, Mould Drying, Ingot Heating,and Ingot Mould Drying, Garnet Drying, Clay Drying, Fire ClayCuring, Refractory Curing, and Many More. ProductDescription : A cubical shell drier, which is acustomized design based on the applications, temperaturerequirement for these applications vary from 100C to300C.Driers are also designed with Direct andIndirect type Driers. Drieris linedwith Refractory and Insulation brick/ Glass wool insulations tohold the Temperature up to 600C. Driers will have twochambers in case of indirect type drier. The chambers are firingand Heating Chambers. If in case of Direct type drier, the recirculation fan must be used for the forced heattransfer. Advantages : OurFurnacesare designedin such a way to reduce the Fuel Consumption.Our furnaces are lined with both refractory bricks andCeramic fibremodules, insuch a way to pass the flue Gas around the material to be heated,enabling high conduction convection and Radiation heattransfer. Combustion/HeatingEquipments are designed to meet therequirements of furnace and Heat transfer rate. Burner will bepositioned inclined to an angle, so that the flame/flue skips onthe surface of the material. Better heattransfer rate throughcirculationand Re-circulation. Our furnacesare designedfor skintemperature of65C(Maximum). Specialties :ManualOperating Furnace AutomaticOperating furnace Air/Fuelratio Regulating system
Mass Flow control System PressureBalancing System FlueControl System.
OptionalAccessories : Pre heatingthe scrapbefore charging can be done. Recuperatorto pass thecombustion air into the Burner at a temperature of 150C(Minimum)for fuel saving upto 40%. Heat GeneratedBy :Light Oil/Heavy Oil/Furnace Oil/ NaturalGas/CNG/LPG/Propane/Butane/BioGas/ Producer Gas
