Description:
1.Engine model : CUMMINS CTAA8.3 /SC 8D190G2B12. Hydraulic parts :The international matching
3. Contact: 86-13989872006
motor gradercummins
TheXCMG GR Series Motor Graders are mainly used in ground leveling ,canalling , slope scraping , earthmoving , scarification or snowremoval work on road, airfield , farmland , and so on .They arenecessary construction machines for national defense engineering ,mine construction, town and country roads building , and farmlandimprovement..
Performance and characteristic
New appearance design.
The articulation frame is adopted and matched with the steering ofthe front wheel, With small turning radius, maneuvering and flexible.
The electro-hydrauliccontrols the power shift gearbox, with 6ahead gears and 3 back gears.
The international matching hydraulic parts areadopted, with reliable operation.
The motions of the blade are fully hydraulicallycontrolled.
The rear axle is the three-sectiondriving axle which is provided with the NO-SPINself-lockingdifferential mechanism.
The manipulation table and seats are adjustable. The arrangement ofthe manipulation handle and instruments arereasonable, with convenient application, and the comfort of driving is improved .
The cab is grand and nice, with wide eyeshot and good sealing .
The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can beadded .
Main Technical Specification
motor gradercummins
GR180 | |
Basic specification | |
| Engine model | CUMMINS CTAA8.3 /SC 8D190G2B1 |
| Rated power/speed | 138kW/2200 140kW/2300rpm |
| Dimension(LxWxH) | 8900×2625×3470mm |
| Operating weight(Standard) | 15400kg |
Performance specification | |
| Travelling speed , forward | 5,8,11,19,23,38 km/h |
| Travelling speed , reverse | 5,11,23 km/h |
| Tractive force(f=0.8) | 84KN |
| Max. gradeability | 30% |
| Tire inflation pressure | 260 MPa |
| Working hydraulic pressure | 18 MPa |
| Transmission pressure | 1.3~1.8MPa |
Operating specification | |
| Max. steering angle of front wheels | Left / Right50° |
| Max. lean angle of front wheels | Left / Right17° |
| Max. oscillation angle of front axle | Up / down15° |
| Max. oscillation angle of balance box | Before / after15 |
| frame articulation angle | Left / Right27° |
| Min. turning radius using articulation | 7.3m |
Blade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°—70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3965×610mm |
Under our policy of continuous product development and improvement, we reserve the right to change specifications and design withoutprior notice.
motor gradercummins
