Send Inquiry
Description:
LonKing Wheel Loader CDM833Hydraulic steering system is used for convenient and easy steering
| Data | ||||
| Bucket Capacity (m3) | 1.7 | |||
| Rated Payload(kg) | 3000 | |||
| Operating Weight(kg) | 10300±300 | |||
| Traction Force(kN) | 97±3 | |||
| Breakout Force(kN) | 100±3 | |||
| Travel Speeds (km/h) | ||||
| I | II | III | IV | |
| Forward | 6.5 | 12.0 | 32.0 | |
| Reverse | 6.8 | 12.5 | 33.5 | |
| Engine | Weichai TD226B | |||
| Rated Power(kw/rpm) | 92/2200 | |||
| Peak Torque(Nm/rpm) | 560/1500 | |||
| Starting Voltage(V) | 24 | |||
| Drive Train | ||||
| Torque Converter | Single-stage, Single-turbine, 3-elements | |||
| Torque Ratio | 3.5 | |||
| Transmission | Countershaft Powershift Transmission | |||
| Gear | 3F/3R | |||
| Pressure of Transmission(MPa) | 1.2~1.5 | |||
| Main Reducer | Spiral bevel, 1-stage Reduction | |||
| Final Reducer | Planetary Reduction | |||
| Tire | 17.5-25 L-3 12PR | |||
| Brake System | ||||
| Service Brake | Single Circuit Caliper, Dry Brake | |||
| Setting Pressure (MPa) | 0.78 | |||
| Parking Brake | Flexible Shaft Controlled Caliper | |||
| Standard | Optional | |||
| Lonking Transmission Lonking Axle Standard Bucket | Log Fork(J) Coal Bucket (M) Side Dump (C) | |||
| Steering System | ||||
| Type | Hydraulic Load Sensing | |||
| Cylinders-Bore×Stroke(mm) | 2-80×315 | |||
| Steering Pump | Gear Pump | |||
| System Pressure(MPa) | 14 | |||
| Flowrate(L/min/RPM) | 88/2200 | |||
| Steering Angle | ±31° | |||
| Hydraulic System | ||||
| Lift Cylinders-Bore×Stroke(mm) | 2-125×784 | |||
| Tilt Cylinder-Bore×Stroke(mm) | 1-140×553 | |||
| Model of Implement Pump | Gear Pump | |||
| Flowrate(L/min/RPM) | 176/2200 | |||
| System Pressure(MPa) | 16 | |||
| Hydraulic cycle time, rated load in bucket(insecond): | ||||
| Raise(Loader) | Dump | Lower(Empty) | Total | |
| 5.5 | 1.3 | 3.7 | 10.5 | |
| Electrical System | ||||
| System Voltage(V) | 24 | |||
| Battery (2 in series)(Ah) | 105 | |||
| Lamp Voltage(V) | 24 | |||
| Service Refill Capacity | ||||
| Fuel Tank(L) | 200 | |||
| Hydraulic Tank(L) | 200 | |||
| Crankshaft(L) | 17 | |||
| Transmission(L) | 36 | |||
| Front Axle(L) /Rear Axle(L) | 13/13 | |||
| Air Conditioning System | ||||
| Heating Capacity(W) | 5800 (±10%) | |||
| Cooling Capacity(W) | 4500 (±10%) | |||
