Description:
Concrete Placing Boom1.Max Placing Radius:27.7 M
2.360 slewing fully with hydraulic control
3.Motor power: 11KW
StationaryConcrete Placing Boom (HG28M)
We(TRUEMAX)are the only manufacture of CPB(Concrete Placing Boom) in China,which developed a complete series of this productionincluding climbing type, mobile type, mechanical type andLattice Tower type from 10m to 51m workingradius.
1.WorkingRange:
2.Main Components
No. | Component | Remark |
1 | Boom assembly | Includes 3 arms, hydrauliccylinder and four-bar linkage. The big arm is divided into twosegments. The root of the big arm is connected with the swiveltable |
2 | Platform of boom |
|
3 | Swivel table | Specially designed workingplatform where hydraulic pump and electrical control cabinet areset on. |
4 | Slewing ring support |
|
5 | Lower-support |
|
|
|
|
6 | Working platform |
|
7 | Hydraulic controlsystem | Includes hydraulic pump, manifoldvalve block,all kinds of valves, hoses and steelpipes. |
8 | Tubular columnassembly | Tubular column assembly isdivided into upper-tubular column and lower- tubular column. Theworking platform is fixed on the upper-tubular section. |
9 | Electrical system | Mainly includes electricalcontrol cabinet, operating device, and main power cable andsword-switch box. |
10 | Climbing device | The climbing device mainly ismade up of 3 sets of climbing frames, 2 hydraulic cylinders and 2long pins. |
11 | Cruciform basetemplate |
|
12 | Concrete foundation |
|
Container Loading:
One set HG28M can be shipped by 1*40Hc1*20Gp.
3.TechnicalFeature
u Themachine is fully driven by hydraulic and can slew 360°
u Thebalance valves are products of oilcontrol Company from Italy
u Thesolenoid directional valves are products of Rexroth orATOS
u Themain electronic components are products of Omron orSchneider
u Operationcan be radio remote control and cable remote control
MainConfiguration:
No. | Name | Brand | Country |
1 | Solenoid DirectionalValve | Rexroth/Atos | Germany/Italy |
2 | Twin Throttle CheckValve | Rexroth/Atos | Germany/Italy |
3 | Pressure ReliefValve | Rexroth/Atos | Germany/Italy |
4 | Slewing CushionValve | OilControl | Italy |
5 | Balancevalve | OilControl | Italy |
6 | Oil Pump |
| China |
7 | HydraulicHose | MaNuLi | Italy |
8 | Joint | EMC | U.S.A |
9 | Cable RemoteController |
| China |
10 | Radio RemoteController |
| Taiwan |
Option:
u Inner-climbingframes: Floor frames or Wall frames(Shaft frames)
u Column:2m-10m.
u Modeof slewing: Gear slewing or rack & Bearing of steplessslewing.
u Voltage:380V/50Hz or 440V/60Hz
u Radioremote Control: Tele Crane HBC or AUTEC
4.Parameters
Model | HG28M | |
Delivery pipe dimension(outside diameter×thickness) JJ83 (mm) | Φ134×4 | |
Delivery hose dimension(inside diameter×length) (mm) | 5″×3000 | |
Radius of placingboom(m) | 27.7 | |
Stationary height(to thejoin between the end of the boom and Swivel table)(m) | 22.9 | |
Three hydraulic foldablearms (m) | 1stsection | 10.5 |
2ndsection | 9.2 | |
3rdsection | 8.0 | |
Boomarticulation(°) | 1stsection | -4.2~ 82.5 |
2ndsection | 0~180 | |
3rdsection | 0~180 | |
Slewingrange(°) | 360 | |
Power ofmotor(KW) | 11 | |
Pressure of hydraulicsystem (MPa) | 28 | |
Type of hydraulicoil | ESSONUTOH46 | |
Interval of climbingframe | climbing | 3.0~4.2 |
Placingconcrete/resting | 6.0~8.4 | |
Mode ofoperation | Cable RemoteControl | |
Radio RemoteControl | ||
Power | 380V/50Hz | |
Wind speedkm/h | Placingconcrete | ≤60 |
Climbing | ≤28 | |
Working temperature(°C) | 0°C ~ 48°C | |
InnerClimbing
5.Approval
6. Photo infactory
7. Projectcase
Project inAlgeria
Project inAustralia
