Description:
Automatic clay brick making machinery1.High output&low price
2.Easy to operate and maintain
3.Have project in Bangladesh
Automatic claybrick making machinery
Productdetails:
1.It canproduce hollow or solid brick with material such as clay, coalgangue, shale and so on.
2.It ismade from carbon steel and alloy steel by whole steel welding.So ithas compact structure.
3.It iswidely accepted because of high extruding pressure, quick moulding,high productivity.
4. It issuitable for the production of high aperture rate hollow brick,high adulteration fly ash agglomeration brick and the productionwith gangue, shale, low plasticity clay, etc.
5.It is themain part of brick production line which is used to mouldingbricks.
6.Withnearly 10 years experience, we have mature technology in making themachine.So we can confirm the quality.
Technicalparameters:
Model | JKB50/50B-35 |
Productioncapacity | 11, 000~16,000 pieces(standard brick) |
Extrusionpressure(MPa) | ≥3.5 |
Requiredpower(KW) | Upperstage:Y6-55 |
Lowerstage:Y6-132 | |
Vacuumpressure | ≤ -0.092 |
Main shaftspeed (rpm) | Upperstage:38rpm |
Lowerstage:25 rpm | |
Shapingmoisture content (wet basis %) | 16~19 |
Rawmaterial plasticity index | 7~15 |
Requiredreducer | Upperstage:ZLY600D i=10.89 |
Lower stage: ZLY800D i=12.55 | |
RequiredV-belt | Upperstage:9 SPB-5500 |
Lowerstage: 10SPC-6000 | |
Requiredvacuum pump(water circulation type) | 2SK~6~2SK~12 |
Requiredelectric motor: Y15~22KW | |
Overalldimension mm(L*W*H) | 6750*1880*2540mm |
Machinematerials:
1. Screwblade or rimer: standard carbon steel materials, rimer face adoptwear-resisting welding materials nickel-based alloy powder throughthe oxyacetylene welding technique spraying to improve its abrasiveresistance. The hardness can reach52HRC-56HRC. It can repeat repairto reduce cost but improve the rate of utilization; |
2. MixerShaft: with standard 45# carbon steel material, After thermaltreatment processes, hardness can reach HB220-240. |
3. Mixingteeth: With standard 45# carbon steel materialin, After thermaltreatment processes, hardness can reach 45HRC-50HRC. |
4. Injectlubricant into the machine mouth to reduce the clay-strip extrusionresistance to achieve the lubrication of the end machine. Use wateror oil to get lubrication function. |
5. Mainelectronic components of the application is Siemens brand products.Manual and controller on the box marked according to customerrequirements shows in English. |
6. Bearingsused in the equipment adopt international standards of China famousbrand: wafangdian, Harbin. |
7. Adoptwater ring vacuum pump with water medium. |
Safety:
1. Whenstarting up, any operator cannot be near by the operating positionof machine. If needing oiling and repairing, they must be carriedout in stoppage state, strictly prohibit oiling and repairing instarting up operation state. |
2. Beforestarting up, inspect whether various protection facilities aresafety & reliability. Eliminate different kinds of insecurityfactors. |
3. Afteroff duty, cur off the power and lock up. In inspecting andrepairing the machine. Cut off the power and lock up, too orlisting suggestion for attention. |
