Description:
1.Engine model : CUMMINS CTAA8.3 /SC 8D190G2B12. Hydraulic parts :The international matching
3. Contact: 86-13989872006
motor gradercummins
TheXCMG GR Series Motor Graders are mainly used in ground leveling ,canalling , slope scraping , earthmoving , scarification or snowremoval work on road, airfield , farmland , and so on .They arenecessary construction machines for national defense engineering ,mine construction, town and country roads building , and farmlandimprovement..
Performance and characteristic
New appearance design.
The articulation frame is adopted and matched with the steering ofthe front wheel, With small turning radius, maneuvering and flexible.
motor grader cummins
The electro-hydrauliccontrols the power shift gearbox, with 6ahead gears and 3 back gears.
The international matching hydraulic parts areadopted, with reliable operation.
The motions of the blade are fully hydraulicallycontrolled.
The rear axle is the three-sectiondriving axle which is provided with the NO-SPINself-lockingdifferential mechanism.
The manipulation table and seats are adjustable. The arrangement ofthe manipulation handle and instruments arereasonable, with convenient application, and the comfort of driving is improved .
The cab is grand and nice, with wide eyeshot and good sealing .
The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can beadded .
Main Technical Specification
motor gradercummins
GR180 | |
Basic specification | |
| Engine model | CUMMINS CTAA8.3 /SC 8D190G2B1 |
| Rated power/speed | 138kW/2200 140kW/2300rpm |
| Dimension(LxWxH) | 8900×2625×3470mm |
| Operating weight(Standard) | 15400kg |
Performance specification | |
| Travelling speed , forward | 5,8,11,19,23,38 km/h |
| Travelling speed , reverse | 5,11,23 km/h |
| Tractive force(f=0.8) | 84KN |
| Max. gradeability | 30% |
| Tire inflation pressure | 260 MPa |
| Working hydraulic pressure | 18 MPa |
| Transmission pressure | 1.3~1.8MPa |
Operating specification | |
| Max. steering angle of front wheels | Left / Right50° |
| Max. lean angle of front wheels | Left / Right17° |
| Max. oscillation angle of front axle | Up / down15° |
| Max. oscillation angle of balance box | Before / after15 |
| frame articulation angle | Left / Right27° |
| Min. turning radius using articulation | 7.3m |
Blade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°—70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3965×610mm |
Under our policy of continuous product development and improvement, we reserve the right to change specifications and design withoutprior notice.
motor gradercummins
motor gradercummins
motor gradercummins
motor gradercummins
motor gradercummins
motor gradercummins
