Description:
1-100t/hlow investment
low energy consumption
easy to operate by 2-3 workers
100% inspection before delivery
Turnkey project (Dry mortar production line)
Introduction:
Weifang Longji Building Material Equipment Co., Ltd.
Dry mortar productionline mixordinary dry mortar and special dry mortar.
We offer design, install , training, repair and maintainservice.
If needed, we also offer mortar formula.
Materials for mortar:
- Binders: Cement, hydrated lime, anhydrite, gypsum.
- Filler: Silica sand, quartz sand, limestone, dolomite, expanded perliteetc.
- Mineral admixture: Ground granulated blast furnace slag, fly ash, pozzolana, finesilica powder etc.
- Water-retention and thickeningmaterial.
- Chemical additives: Cellulose esters, superplasticizer, air entraining agents,accelerating agents, retarding agents, defoaming agents,hydrophobic agents, and etc
Application Range:
1. Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchoragemortar etc.
2.Decoration mortar:Decorativeplaster, inner and outer wall putty, colorful decoration mortaretc.
3.Protection mortar:Water-proofmortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulationmortar, sound insulation mortar, repair mortar, mildewproof mortar,shielding mortar etc.
Production process:
1.Raw material storage
2.Raw material convey and weigh
3.Addition and weighing of additive
4.materials mixing
5.finished mortar storage and packing
6.Other device: dust collection system air compressor system PLCelectric controlling system steel supporting system
FRQ:
1.How is the investment?
A:My engineer will design a suitanle mortar plant as yourbudget.
Low capacity , low investment.
Semi-automatic, low investment.
High capacity , high cost.
Full automatic, high cost.
2.What’s the difference between full-automatic line andsemi-automatic line?
A:(1)Sem-automatic line need manual help to upload materials, whilefull-automatic line need not.
(2)semi-automatic line may not need material silos, full-automaticline need.
(3)Semi-automatic line is relatively cheaper than full-automaticline.
3.How many person needed in this line?
A: 2-3 workers will be enough to operate this line.
4.What equipment you can offer?
A: We offer equipments from storage system to packing system. Thewhole working process.
5.What is factory area needed?.
A: It depends on the line type. 40-1000m*m will beenough.
If your area is not enough, we can design towertype plant which takes less floor area.
6.What’s the total power consumption (KW)?
A:It is about 20-200KW. It is widely depends on the capacity andnumber of raw materials.
7 What’s the capacity of the line?
A:1-120 ton per hour.
8.What’s the guarantee period?
A:12 months. With in this 12 months we take care of all theproblems occurred, after that we offer repair and maintainservice(online type and in person type.).
9.Can you install in my country?
A:Yes, we offer oversea installation service.
10:Can you teach us how to operate this line?
A:Yes.We offer training service free of charge.
11:How can I inspect the line before shipment?
A:You can inspect by yourself or you fine someone inspect foryou.
12.If you want to know more info about mortar and mortar plant,please send enquiry or e-mail:sales01(at)wflj.com
I am Mina Yang.
Or visit:
http://www.wflj.net/en/products.asp?fenlei=Products&classid=20
Models of dry mortar production line:
Mode | Capacity
| Area | Height | Note |
Simple | 1-15t/h | 40m2 | 5-10m | Manualbatching and Packing |
Basic | 5-15t/h | 40-60m2 | 6-10m | Manualbatching, automatic packing |
Semi-automatic Serial | 5-15t/h
| 40-200m2 | 8-12m | Automaticbatching of coarse material, manualbatching of additive, automatic packing |
Semi-automatic Tower | 5-50t/h
| 40-100m2 | 10-25m | Automaticbatching of coarse material, manualbatching of additive, automatic packing
|
FullyAutomatic Tower
| 5-100t/h | 60-500m2 | 10-30m | Automaticbatching of all raw material and packing
|
